Nissan Titan Forum - View Single Post

karlconnell · 03-03-2004, 08:22 PM

Thought I would post this in the problems section as well for anyone that may come across the same issue later on...

Recently I began to notice some vibration in the front and rear while braking so I decided to take the truck into the dealer today. Net, the front and rear rotors were warped...at 4,000 miles, with 1k from a trip that we just made this past weekend with mostly highway driving and very little braking. They machined the fronts but I have to go back to do the rears. However, I'm not sure I'm happy with the fact that they were machined and not replaced. Clearly, there is a problem with the build quality of my particular set rotors if they warped in 3,000 miles.

Not a good day for me guys...

Karl

03-03-2004, 08:22 PM	#1 (permalink)
karlconnell Registered User iTrader: (0) Join Date: Jan 2004 Location: Phoenix, AZ. Posts: 294 Thanks: 0 Thanked 0 Times in 0 Posts	Warped rotors Thought I would post this in the problems section as well for anyone that may come across the same issue later on... Recently I began to notice some vibration in the front and rear while braking so I decided to take the truck into the dealer today. Net, the front and rear rotors were warped...at 4,000 miles, with 1k from a trip that we just made this past weekend with mostly highway driving and very little braking. They machined the fronts but I have to go back to do the rears. However, I'm not sure I'm happy with the fact that they were machined and not replaced. Clearly, there is a problem with the build quality of my particular set rotors if they warped in 3,000 miles. Not a good day for me guys... Karl __________________ 2004 Titan SE CC RWD, Canteen Big Tow Package Utility Bed Package SE Preferred Package Sliding Bed Extender Sliding Tool Box Hood Protector 2003 Toyota 4Runner 4x4 V8 2004 Arctic Fox 22H Travel Trailer Truck and RV Last edited by karlconnell; 03-13-2004 at 11:10 AM.