Nissan Titan Forum - View Single Post - Dealer says: Cut rotors and new rear pads?!? P0174?

mystican · 04-24-2008, 06:25 PM

My local dealer is checking out the issue with the SES light. They have had the Titan for 2 days now. They have talked with NISSAN tech. Code thrown was P0174 (Engine too lean). I told them to check the MAF and O2 sensor. Both are now replaced, but code is still on. Truck has only 34K miles.

Other issue: Mushy brakes. The brake judder service has already been performed. The dealer is now saying the "hydraulics are fine", but all the rotors are rusty and need resurfacing and also new rear pads. I think this makes no sense whatsoever. Any ideas?

04-24-2008, 06:25 PM	#1 (permalink)
mystican Registered User iTrader: (0) Join Date: May 2006 Posts: 18 Thanks: 0 Thanked 0 Times in 0 Posts	Dealer says: Cut rotors and new rear pads?!? P0174? My local dealer is checking out the issue with the SES light. They have had the Titan for 2 days now. They have talked with NISSAN tech. Code thrown was P0174 (Engine too lean). I told them to check the MAF and O2 sensor. Both are now replaced, but code is still on. Truck has only 34K miles. Other issue: Mushy brakes. The brake judder service has already been performed. The dealer is now saying the "hydraulics are fine", but all the rotors are rusty and need resurfacing and also new rear pads. I think this makes no sense whatsoever. Any ideas? Last edited by mystican; 04-24-2008 at 06:58 PM.