Quote:
If the problem is, in fact, sliding utilitrack covers, then I'd say put a very small amount of hot melt glue on the outside of the two bottom utilitracks, towards the front. Not very much glue - you just want a bit of extra girth to the track.
After the glue dries and becomes a bit rubbery, slide the track covers all the way forward and they'll stay in place.
|
I just cut off about 1/2 inch of the covers just enough to allow me to put on those "stops"(don't know the proper term) on the 2 bottom tracks. Now the covers don't slide anymore. My noise is most definitely gone. Before, mine slid freely and would clunk everytime I accelerated and braked. I was given 4 "stops" with my truck, one for each track.
__________________
2004 Deepwater 4x4 SE CC, Born on 03/22/2004 2:34pm, Popular w/bench, OffRoad, Big Tow(VDC), Utilitrack, Sliding Bed Extender, Splash Guards, Mats, Step Rails, Hood Protector, K&N Air Filter
|