Pictures of my 2 12's and amps
Sorry for the delay guys, but here what I've got in my CC Titan. I've got 0 guage wire running from my battery(which I'm upgrading) to a Batcap to keep the voltage constant. From there I've got 4 guage wire running to the fuse block and to the amps. 2 Rockford Power 500a2 (750 watts a piece) powering 2 12" Rockford Power DVC's (1200 watts RMS a piece). The box is made from 3/4" high density particle board. It's a sealed enclosure with each side have just over .90 cubic feet. My subs require .75, so it's a perfect match. I custom made it so there is a 3/4" ridge all the way around the top of the box. I made a grill cover by bending and welding 3/8" rod to form inside the ridge (not fun). I had to hand sew the grill clothe on the cover and by the way I suck at sewing. I plan on making a new box in the future, I've got some neon lights and plexi mirror laying around and might make a see through box. I'm putting on some 18" chrome American Racing Jammers tomorrow. Anyhow, here are some pictures.
Amps were mounted on a 1/2" board which was carpeted and mounted
[/IMG]
A picture of the Batcap and wires
[IMG]
Side picture of the box, the seat sits on the ridge of the box not hurting the subs.
[/IMG]
2 Rockford 12" Power DVC's with grill cover off.
[IMG]
Grill cover on.
[/IMG]
I don't think I've got the pictures set up right, but I'm sure you guys can figure it out.
Thanks all, Dan
|