Nissan Titan Forum - View Single Post

joebob · 01-13-2009, 10:23 AM

So I have been looking for an interior switch to run my aftermarket fog lights and have not find one so far.

I was bored one night and decided to remove the blanks that are on the dash beside the steering wheel and see what I could do with them.

I took the switch that came with my fog lights and made a mark on it and cut it out with my dremmel tool. I had to use the wire wheel attachhment to clean the support fins out of the back side of it. After that I was able to put the switch in that came with the fog lights. As you can see from the pics they don't actually look that bad. Let me know if you have any suggestions.

01-13-2009, 10:23 AM	#1 (permalink)
joebob Registered User iTrader: (0) Join Date: Apr 2008 Location: Mesquite, Texas Posts: 36 Thanks: 1 Thanked 0 Times in 0 Posts	Idea for Custom Switch So I have been looking for an interior switch to run my aftermarket fog lights and have not find one so far. I was bored one night and decided to remove the blanks that are on the dash beside the steering wheel and see what I could do with them. I took the switch that came with my fog lights and made a mark on it and cut it out with my dremmel tool. I had to use the wire wheel attachhment to clean the support fins out of the back side of it. After that I was able to put the switch in that came with the fog lights. As you can see from the pics they don't actually look that bad. Let me know if you have any suggestions. __________________ 04 Sedona SE 4X4 Interior Mods: 2 x 12" MTX Subs 750 watt amp Infinity 5x7s in all doors Custom switches for Off Road lights and Fog lights Exterior: Smittybilt Bull Bar Aftermarket Fog Lights Off Road lights (Not sure what kind but will be replaced soon... They were a gift) Soon to come: PRG Mini Lift Still deciding on rims (leaning towards RBP 93R) PowerAid Throttle Body Spacer Gibson Dual Extreme Exhaust Kit AIRAID Intake System I am sure I forgot something...