[kbadger3]

Pic #1- The easy access mute button

Pic #2-Front Radar sensor(right) and Laser sensor(left)

Pic #3-Spot I used to come through the firewall

I have a pic of the rear laser detector mounted above the license plate, I will post later since it shows my plate # I need to block that out


Pic #4-Inside of the door skin with dynamat

Pic #5-Skin and inner shell with dynamat

I used the stinger because I had a bunch laying around. I used 2 3/4 sheets that were 18"X32" to do this one door. This is the only door I have done so far, but I plan on doing all four doors, floor, back wall, ceiling, and maybe all the pillars