Nissan Titan Forum - View Single Post - SAW pre-load height?

christo · 06-19-2009, 12:28 PM

I've been running mine at 2 1/4" for over a year now, the ride is a bit stiffer and the front end sits about 1/2" higher in front - but I do not have the deaver pack in the rear.

Now I do have a leak in one of my SAW's, I don't know if this is due to beating the crap out of them in the desert, poor seals on the SAW's, or due to running them at 2 1/4".

06-19-2009, 12:28 PM	#2 (permalink)
christo Registered User iTrader: (0) Join Date: Mar 2007 Location: San Diego Posts: 59 Thanks: 0 Thanked 3 Times in 3 Posts	Re: SAW pre-load height? I've been running mine at 2 1/4" for over a year now, the ride is a bit stiffer and the front end sits about 1/2" higher in front - but I do not have the deaver pack in the rear. Now I do have a leak in one of my SAW's, I don't know if this is due to beating the crap out of them in the desert, poor seals on the SAW's, or due to running them at 2 1/4". __________________ 07 XE CC, Magnaflow DI/SO, K&N 57 FIPK GEn II, NCD UCA, SAW Coilovers, FOX Shocks, OEM Fogs, OEM Off Road Rims.. and well a few other things too ;-)