Nissan Titan Forum - View Single Post - Ya get some, ya lose some? You gotta be kiddin me?!?

PHOEBISIS · 11-02-2004, 09:45 AM

Look at the equation,they have to cross at 5252.Now they don't measure at exactly 5252 RPMS,so sometimes it will appear the graphs don't cross,but HP=TQ at 5252 -ALWAYS-.Ask Coach Boone-I have seen him give some math corrections here before.Math teacher??Thanks,Charlie PS I didn't tumble to this,someone told me,and them it seemed obvious.
TQx5252/5252=HP cancel out the 5252 and TQ=HP at 5252RPMs always.
RHOLLAND-the right hand and left hand vertical scales are different,so that is why the curves don't cross.If they were the usual-both TQ and HP on the Y axis(left hand vertical),they would cross at 5252.

11-02-2004, 09:45 AM	#7 (permalink)
PHOEBISIS Registered User iTrader: (0) Join Date: Apr 2004 Posts: 1,535 Thanks: 0 Thanked 0 Times in 0 Posts	They have to cross at 5252-ALWAYS!!Check equation. Look at the equation,they have to cross at 5252.Now they don't measure at exactly 5252 RPMS,so sometimes it will appear the graphs don't cross,but HP=TQ at 5252 -ALWAYS-.Ask Coach Boone-I have seen him give some math corrections here before.Math teacher??Thanks,Charlie PS I didn't tumble to this,someone told me,and them it seemed obvious. TQx5252/5252=HP cancel out the 5252 and TQ=HP at 5252RPMs always. RHOLLAND-the right hand and left hand vertical scales are different,so that is why the curves don't cross.If they were the usual-both TQ and HP on the Y axis(left hand vertical),they would cross at 5252. Last edited by PHOEBISIS; 11-02-2004 at 09:52 AM.