[black04titan]

i installed it with a cast on my right arm (and im right handed) because i tore a ligiment, took me about an hour and twenty mins. BUT! what you need to do is make sure you tighten the bolt for the braceing arm on the intake really really tight, if you dont it will fall off (like mine did) the truck won't even start if that wire that the brace is connected to. I think it is some kind of ground wire or somthing, but whatever it is it's really important... I got stranded in the middle of Mexico at 11 p.m. and I didn't have a bolt so I "borrowed" some wire off a near by barbwire fence and wired it back on, it ran fine. actually... That wire is still on there I'll take a pic and post it if you want more information