Nissan Titan Forum - View Single Post

lizardking · 06-08-2005, 11:51 PM

You can use the sub speaker wires and run them into the high level inputs of your amp... I've did it on my Titan when I had it and it worked perfectly but I didn't have some run of the mill amp when I did it.. But using a LOC and taping into the rear channel just behind the headunit is the best place.. If I where you I would dump the cheap arse Rockford Fosfake and buy a decent radio like Alpine, Eclipse, Pioneer Preimer, or Kenwood Excelon just to name a few..

06-08-2005, 11:51 PM	#8 (permalink)
lizardking Supporting Vendor (Gold) iTrader: (2) Join Date: Jan 2004 Location: Ashland, Pa Posts: 3,288 Thanks: 0 Thanked 0 Times in 0 Posts	You can use the sub speaker wires and run them into the high level inputs of your amp... I've did it on my Titan when I had it and it worked perfectly but I didn't have some run of the mill amp when I did it.. But using a LOC and taping into the rear channel just behind the headunit is the best place.. If I where you I would dump the cheap arse Rockford Fosfake and buy a decent radio like Alpine, Eclipse, Pioneer Preimer, or Kenwood Excelon just to name a few.. __________________ 2007 Toyota Tundra DC SR5 TRD 4X4 Headunit: Kenwood Excelon DDX812 Front Stage: Dynaudio Esotec System 242 Front Stage Amp: Mmats SQ2175 Sub Stage: Image Dynamics IDQ12D4V.3 (DUAL) Sub Stage Amp: Sundown Audio SAZ-1500D FatMat and B-Quiet (200 SQ/FT) KnuKonceptz hardware Dynaudio "Authentic Fidelity" Esoteric: "Understood by and meant for a select few." The business man is going to service your account!