Nissan Titan Forum - View Single Post

antwon412 · 06-17-2005, 10:52 AM

i have a RF 1001BD 1000 watt mono amp. Its rated at 1000 watts at 4 ohm. It is 1 ohm stable. I can bridge it down to 2 ohms with no problems. I would think that woul dbe enough to run them?

I was also thinking though of getting perhaps a lower grade sub due to having limited airspace. would two on each side of the hump have enough airspace?

06-17-2005, 10:52 AM	#9 (permalink)
antwon412 Registered User iTrader: (0) Join Date: Apr 2004 Location: San Leandro, CA (Bay Area) Posts: 407 Thanks: 0 Thanked 0 Times in 0 Posts	i have a RF 1001BD 1000 watt mono amp. Its rated at 1000 watts at 4 ohm. It is 1 ohm stable. I can bridge it down to 2 ohms with no problems. I would think that woul dbe enough to run them? I was also thinking though of getting perhaps a lower grade sub due to having limited airspace. would two on each side of the hump have enough airspace? __________________ SOLD! - Looking to get new LE CC LB eventually..... 2004 LE CC 4X4 Smoke/Graphite Nav Dvd Big Tow Everything else they offer MB Motoring Razor 20x9 / Nitto Terra Grapplers 305/55-20 FlowMaster 40 Deltas Dual Side out 3" Slant rolled tip Westin Chrome Bull Bar PRG 2/1 Mini Lift 2 Rockford Fosgate Power HX2 DVC 10" Subwoofers (blown now d@mnit) 1 Rockford Fosgate Power 1001BD 1000 watt Amplifier Playstation 2 & Xbox under rear seat "Small Victories, but victories none the less"