View Single Post
Old 09-28-2006, 06:50 PM   #1 (permalink)
Cienfuegos
iTrader: (0)
 
Join Date: Oct 2003
Location: Miami, FL
Posts: 264
Send a message via AIM to Cienfuegos
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to Cienfuegos
Question Poping Sound from 4" Spindle Lift

Hey Greg, I wanted to see if you have any input to help me out...

When ever I turn the wheel full rotation and or hit a dip while in mid turn or at a full turn. I hear a metal poping sound coming from the front suspension. Also when driving it sounds like somthing is loose and rattling when driving.
Some times I hear metal contact when the suspension travels at some angles.

I really don't know whats going on with the suspension, I did notice some metal ware ( will take some pictures and post them). Also I think that all the noise is probably connected in some fashion. The shop that did the install for me is a good shop and I trust them. On that note this was the first time they did this work on a Nissan Titan.


4" Spindle Lift Front, Blistens & 2" Blocks in the rear is what I have installed.


Thanks
Anthony
__________________
Support Our Troops

BOD 5/20/04 SE 4X2 CC Canteen RF BedUT OffRD BigTow Side AB TruxCover LundInercep SilverStars Hella500s, Bakuplites, MT 18X10, Nitto Grapplers, 4" Spindle Lift, Blistens, BushWacker, 2" Rear Blocks
Scratches on a Truck are just Battle Scars.
Anthony Cabrera
Cienfuegos is offline   Reply With Quote