Nissan Titan Forum - View Single Post

buzzkillwill · 08-31-2007, 11:20 AM

It's pretty easy to do. I used a 3/8" breaker bar (IIRC) and that's about it. I took nothing off the truck, nor used anything other than the tensioner to do it.

I took mine off to put on a short belt when i was at the race track.

The trick is, putting the breaker bar in the right spot, so that you can have room to slide the belt over the last pulley.

Like sudden urge said, there's a tensioner there, then route the new in the same path.
I actually drew a picture on a piece of paper so that I could remember how to get it back on.

08-31-2007, 11:20 AM	#13 (permalink)
buzzkillwill Registered User iTrader: (1) Join Date: Jan 2005 Location: So. Central PA Posts: 2,792 Thanks: 5 Thanked 10 Times in 8 Posts	Re: Help on replacing drive belt? It's pretty easy to do. I used a 3/8" breaker bar (IIRC) and that's about it. I took nothing off the truck, nor used anything other than the tensioner to do it. I took mine off to put on a short belt when i was at the race track. The trick is, putting the breaker bar in the right spot, so that you can have room to slide the belt over the last pulley. Like sudden urge said, there's a tensioner there, then route the new in the same path. I actually drew a picture on a piece of paper so that I could remember how to get it back on. __________________ SOLD2004 SE CC Radiant Silver 4X4 w/ Pop. Pkg and DVD SOLD SOLD 2005 Titan XE KC w/ Preferred Package BLACK SOLD 2004 Chevy RCSB 5.3/3.42gears/Auto/Whately Tune/ Intake/Exhaust 15.0 @92MPH