I have the CST 8" lit on my truck now... Was thinking about changing directions in my suspension and want to see if I can create any interest on what I have! This will be a complete kit minus the brake lines because I will need them still. I will be supplying a brand new carrier bearing drop bracket because that will also be staying on my truck, and that's the most expensive part that will be needed so I'll supply it for you. THIS IS FOR 2WD TRUCKS ONLY!!!! Will not work for any year 4wd trucks. Only asking for $1700 for everything!!! I installed this lift myself following exactly the instructions that CST supplies to make sure that everything was done properly and tightened properly. U-bolts have been properly torqued and checked routinely, camber bolts have been checked with every oil change. I babied this thing!! Everything is a little dusty, but it will all be cleaned and re-greased as soon as it comes off the truck. It will come with everything listed...
-CST Uniball Upper Control Arms and uniball spacers
-CST Spindles (specifically made for the 8" lift, does not work like the 4" lift spindles)
-CST Coil Spacer
-CST Bump Stop Spacer
-Brand new CST Droop Stops (Original, need to be welded on so I just never had them put on)
-CST Drop Bracket
-Adjustable camber alignment bolts
-Brand new PRG adjustable length sway bar end links (bought them and just never put them on)
-Brand New CST Carrier Bearing Drop Bracket
-4" CST tapered rear blocks
-U-Bolts for mounting the rear block
-Brake line mounting bracket for the rear brake lines
-2.0" Radflo Remote Reservoir Rear shocks with new upper and lower bearings
All of this was on the truck for less that 12,000 miles. I never took this offroad because I was too afraid to break something and it is my daily driver... I would like to keep everything together, just because it will be easier for the person that wants it, since it will include everything. And I would also like to try and keep it as local as possible because shipping is going to be a hassle.
THIS WILL NOT BE COMING OFF THE TRUCK UNTIL AT LEAST THE BEGINNING OF MAY!!!!
If you have any questions or would like more pictures of anything, feel free to shoot me a PM and I'll try to get what you want. Many people have seen this in person, and can vouch for who I am. And now for the pictures...
UCA, Coil Spacer and Spindle...
Driver side Radflo/block...
Passenger side Radflo/block...
Couple of views with the lift on the truck...
2008.5 SE Smoke CC---The best color that Nissan has put through the production line!
Mods: Satin black OEM 20's with 35" M/T, CST 8", Radflo 2.0 rears, 1.5" wheel adapters for the front, Flowmaster 50 dumped, Kenwood DDX712, 2 Audiobahn 12s, DDM HID 6k lows, Hornblasters Shocker XL
Want: PA system/Police siren, headlight mod, color matched grille and bumpers...
http://legitaccessories.com/ Recognizing that I volunteered as a Ranger, fully knowing the hazards of my chosen profession, I will always endeavor to uphold the prestige, honor, and high esprit de corps of the Rangers.
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.