FS: Used Pro Comp stage 1 lift

Tolleyy · 03-18-2008, 08:07 PM

I got this used and never mounted it myself, and since I now tow an 8K lbs travel trailer I've really decided not to lift my truck so it's time for this lift to go to someone that will use it. I'm pretty sure everything is here so take a look at the picture, what you see is what you get. NO INSTRUCTIONS, but I'm sure you can get them at Pro Comps website. I was told it came off an 06with 9k on the lift. Here's what I know for sure is missing:
1 nut for the front spacer, should be easy to get at any hardware store.
1 leaf spring u-bolt is broken, but when I was going to install it I was just going to get 4 all new ones.
From what I can tell, everything else is there and in good shape. No major rust issues since it's from california. The paint is coming off in some spots on some pieces and one shock. Pro Comp didn't seem to paint these parts very thick, I was planning on rattle canning everything before I installed it.

Price is $ 800.00 OBO. I would like to sell local, but may be willing to ship if buyer pays. Located in Sacramento,CA area

foreignracer · 03-18-2008, 08:56 PM

This strikes my interest. Where can you pick up the right u-bolt other than Pro-comp? It seems like everything is there.

Tolleyy · 03-18-2008, 09:02 PM

Quote:

Originally Posted by foreignracer

This strikes my interest. Where can you pick up the right u-bolt other than Pro-comp? It seems like everything is there.

I was just going to take one to Napa or some other auto parts place and see if they can match the u-bolts. I've had no problems at Napa having them match u-bolts in the past. I can check tomorrow and let you know.

KILLswitch · 03-18-2008, 09:31 PM

is this a 6" lift?

cardman · 03-18-2008, 09:48 PM

Quote:

Originally Posted by foreignracer

This strikes my interest. Where can you pick up the right u-bolt other than Pro-comp? It seems like everything is there.

greg has them, give him a call...they are rather cheap

Hawaiianbasshead · 03-18-2008, 09:49 PM

Quote:

Originally Posted by KILLswitch

is this a 6" lift?

fairly sure that's all procomp offers for the titan

Tolleyy · 03-19-2008, 11:49 AM

Quote:

Originally Posted by KILLswitch

is this a 6" lift?

Yes it's a 6" stage 1 lift

FourDoor · 03-19-2008, 02:16 PM

This is tempting.

Aside from the missing nut and u-bolt, what else would be needed to get this installed and the Titan fully up and running on a 6" lift?

Clancy · 03-19-2008, 02:25 PM

Quote:

Originally Posted by FourDoor

This is tempting.

Aside from the missing nut and u-bolt, what else would be needed to get this installed and the Titan fully up and running on a 6" lift?

I'm pretty sure Greg would yell at you for re-using any used u-bolts. To whoever buys this - buy 4 new ones. Cheap insurance on keeping your axle under your truck.

foreignracer · 03-19-2008, 03:24 PM

Quote:

Originally Posted by Clancy

I'm pretty sure Greg would yell at you for re-using any used u-bolts. To whoever buys this - buy 4 new ones. Cheap insurance on keeping your axle under your truck.

After thinking about the stress on these, I totally agree!

Tolleyy · 03-19-2008, 04:25 PM

Quote:

Originally Posted by FourDoor

This is tempting.

Aside from the missing nut and u-bolt, what else would be needed to get this installed and the Titan fully up and running on a 6" lift?

Not to sure since I never installed it, but other than those 2 items I believe
everything else is there. That's why the price is low since I'm not sure.

Tolleyy · 03-19-2008, 08:38 PM

For those interested in this kit, I just went to Pro Comp's website and downloaded the installation instructions and parts list. At a quick glance I noticed that there is also brake lines for the front which I also have that is not shown in the picture. I have to get the kids to bed so no time tonight to completely go over every nut and bolt, but it looks like everything else is there. I'll go thru tomorrow PM and see if anything else is missing.

Thanks,
Mike

imjustdamngood · 03-20-2008, 07:41 PM

If you have time and can look at the list and see what all exactly is missing and let me know, i'll definitly buy the kit

Tolleyy · 03-20-2008, 08:41 PM

Quote:

Originally Posted by imjustdamngood

If you have time and can look at the list and see what all exactly is missing and let me know, i'll definitly buy the kit

There's 3 pages of parts list and I won't have time until this weekend or next week to itemize every nut and bolt. The kit is pending sale as is for now, but I will let you know for sure.

Thanks

Tolleyy · 03-24-2008, 07:49 PM

I had time today and went thru what's missing... alot more than I thought. Here's list of part #'s and quantity of what's missing:

All these are quantity of (1)
13-90087 u-bolts
20-65302 u-bolt nuts
90-6358 skid plate drop kit/ rear brake line bolts
90-6426 steering stop reinforcement
90-6363 rear brake line bracket kit
90-6359 crossmember bolts
90-6317 nut that's missing on the spacer

(2) 90-3118 sway bar spacer plate, I have 2, need 4 total.

If you have only one rubber brake line at the rear axle you will also need a 90-6421 kit.

After going over the install instructions and parts list, this is what's needed to make it a complete kit. I've gone over it twice, but with the kids bored and bugging me while I did this

I may have missed somthing. All the major pieces are there, just missing bolt and nut kits. I'm going to call 4wheel parts tomorrow and get prices on these. If I get these parts, and make a complete kit, the price will most likely go up. If anyone is interested in the lift AS-IS , make me a reasonable offer.