 |
 |
|
|||||||
Buy/Sell  Got some parts or a truck you need to sell? Need to find something? This is the place to look.
If you are unable to find a used car here, you may try our Used Car search engine at the following URL: Used Car Search, or simply put your Zipcode into the following box and a direct search will be done in your area. |
 |
|
|
LinkBack | Thread Tools | Rate Thread | Display Modes |
07-20-2008, 07:51 PM
|
#1 (permalink) |
|
Registered User
 iTrader: (7)
Join Date: Apr 2006
Location: Southern Kalifornia, 91732
Posts: 4,124
Thanks: 10
Thanked 16 Times in 12 Posts
|
FS: Custom front tube bumper
I am asking $450 obo. The way I figure, We spent about 22-25 hours on this thing bending and welding. At a fab shop, this would cost over $1200 in labor alone ($60/hr X 22 hours), and that's on the low side, I'm assuming... Also, I am open to trades, wheels, tires, tell me what you got!
Tube size - 1.75" .120 wall Amount used - 35' plus or minus a few feet. Total of 4 light tabs already welded on 100% BOLT ON, NO WELDING REQUIRED! Front aluminum skid plate included, I think I used 1/4"...... SOB cost me $50! I probably have a can or two of the teflon colored paint left if you want it. It needs a bit of touch up after the latest work I did to it. It was originally designed to accept a winch, but I never got around to completing it. Enough BS, pic time:     
__________________
  2006 4X4 LE OR CST 7" Lift, RadFlo 2.5 coilovers, PRG Uppers, RadFlo 2.0 rears, Deaver 2.5 mini pack, 3" custom block, PRG traction bars, K&N Intake, 2* advance, Custom Supertrapp exhaust, XE mirror covers and door handles, 17X8 AR Mojave Teflon's, 35/12.50R17 Toyo Mud Terrains, Bushwacker fender flares, Custom one off front tube bumper. www.myspace.com/yellomantis Last edited by Yellomantis; 11-24-2008 at 11:10 PM. Reason: new price |
|
|
|
07-20-2008, 08:32 PM
|
#3 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Oct 2006
Location: Anchorage, Alaska
Posts: 373
Thanks: 1
Thanked 1 Time in 1 Post
|
Re: FS: Custom front tube bumper
That is the best looking custom bumper I have seen so far. Nice work. I think if you added more tubing on the bottom to add more lines it would look awesome too, might hide more of the frame and stuff. Looks bad as s for sure!!!!!
__________________
2006 LE, CC, BT, 4x4-Blizzard White JBA catback, K&N cai, poweraid TBS, grounding kit, 2 degree timing, UpRev tuned, TruTrac Debadged,4 piece billet grille, 20"Akuza wheels, tech12's w/ Memphis PR1-1000 amp / M-10's, Kenwood 7019 DD,DVD HU, Line of Fire LED light bar, LED third brake light, smoked tails, EFX HID lows and fogs, painted to match MADA air dam / inchannel window visors, Stillen Billet aluminum cap covers, 15% front tint, Non BT mirror swap. Truxedo lo pro tonneau cover |
|
|
|
|
07-20-2008, 09:37 PM
|
#4 (permalink) | |
|
Registered User
iTrader: (7)
Join Date: Apr 2006
Location: Southern Kalifornia, 91732
Posts: 4,124
Thanks: 10
Thanked 16 Times in 12 Posts
|
Re: FS: Custom front tube bumper
Quote:
I am getting rid of it due to future plans with the truck. This no longer fits in the grand scheme of things... 
__________________
2006 4X4 LE OR CST 7" Lift, RadFlo 2.5 coilovers, PRG Uppers, RadFlo 2.0 rears, Deaver 2.5 mini pack, 3" custom block, PRG traction bars, K&N Intake, 2* advance, Custom Supertrapp exhaust, XE mirror covers and door handles, 17X8 AR Mojave Teflon's, 35/12.50R17 Toyo Mud Terrains, Bushwacker fender flares, Custom one off front tube bumper. www.myspace.com/yellomantis |
|
|
|
|
|
07-21-2008, 08:50 AM
|
#5 (permalink) |
|
Premium User
 iTrader: (6)
Join Date: Feb 2008
Location: So Cal
Posts: 1,195
Thanks: 1
Thanked 2 Times in 2 Posts
|
Re: FS: Custom front tube bumper
Damn Casey, that thing is bad ***! Bump for ya...
__________________
2006 Nissan Titan XE C/C - Granite, XE Preferred Pkg, Flowmaster SI/DO Muffler, 2* advance, 17" Off-Roads with BFG AT K/O 315/70/17's, AVIC-D3 CD/MP3/NAV/DVD, CST 4" Spindle Lift, 2.5" PRG Spacer, Pro-Comp ES9000 rear shocks, 4" Fabtech block, Fabtech CBDB, chrome door handles, Big Tow Mirrors, Nissan factory hitch, Tekonsha Prodigy Brake Controller, Curt WD hitch, Detroit TrueTrac (on the way). 2008 Carson FL162 Fun Runner Toyhauler 2008 Kawasaki Teryx 750 4x4 - billet exhaust tip, 4 seat cage by JG Fab, 6" KC Daylighter HID's, Race-Trim 42" Bench, 4-point Crows, Custom Red Canvas Top, Billet Green Sticker Plate, much more to come (as funds allow). 
|
|
|
|
|
07-21-2008, 10:37 AM
|
#6 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Mar 2006
Location: Central Valley, CA
Posts: 1,117
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: FS: Custom front tube bumper
man.... you really know how to time this kinda stuff just right... the lady's about to pop any day now and my penny jar is just too fricken low... however it's always good to tag it for later... and of course a nice "bump" too...
__________________
Radiant Silver '06 Titan SE CC 4X4 w/BT&OR w/ ATS Fender Flares PC 6" lift w/ PRG A arms & traction bars, SAW's front/rear combo & Deaver pack 34" Nitto Terra Grappler's on 17" Helo Maxx 6's Volant CAI, PowerAid TBS, Flowmaster 40 DECEPTICON center grill, SS Hood Deflector & Chrome Truck Nutz
|
|
|
|
|
07-21-2008, 10:57 AM
|
#7 (permalink) | |
|
Registered User
iTrader: (7)
Join Date: Apr 2006
Location: Southern Kalifornia, 91732
Posts: 4,124
Thanks: 10
Thanked 16 Times in 12 Posts
|
Re: FS: Custom front tube bumper
Quote:
__________________
2006 4X4 LE OR CST 7" Lift, RadFlo 2.5 coilovers, PRG Uppers, RadFlo 2.0 rears, Deaver 2.5 mini pack, 3" custom block, PRG traction bars, K&N Intake, 2* advance, Custom Supertrapp exhaust, XE mirror covers and door handles, 17X8 AR Mojave Teflon's, 35/12.50R17 Toyo Mud Terrains, Bushwacker fender flares, Custom one off front tube bumper. www.myspace.com/yellomantis |
|
|
|
|
|
07-21-2008, 11:18 AM
|
#8 (permalink) |
|
Registered User
iTrader: (1)
Join Date: Sep 2005
Location: maricopa, az
Posts: 1,044
Thanks: 0
Thanked 2 Times in 2 Posts
|
Re: FS: Custom front tube bumper
nice bumper, someone will get a good deal on it....free bump!!
you getting the arb bumper??
__________________
 cst///radflo///sway-a-way///hankook///deaver///pioneer///t-rex///deathreat ...only the best for my truck... 
|
|
|
|
|
07-21-2008, 12:33 PM
|
#9 (permalink) | |
|
Registered User
iTrader: (7)
Join Date: Apr 2006
Location: Southern Kalifornia, 91732
Posts: 4,124
Thanks: 10
Thanked 16 Times in 12 Posts
|
Re: FS: Custom front tube bumper
Quote:
__________________
2006 4X4 LE OR CST 7" Lift, RadFlo 2.5 coilovers, PRG Uppers, RadFlo 2.0 rears, Deaver 2.5 mini pack, 3" custom block, PRG traction bars, K&N Intake, 2* advance, Custom Supertrapp exhaust, XE mirror covers and door handles, 17X8 AR Mojave Teflon's, 35/12.50R17 Toyo Mud Terrains, Bushwacker fender flares, Custom one off front tube bumper. www.myspace.com/yellomantis |
|
|
|
|
|
07-22-2008, 08:14 PM
|
#10 (permalink) |
|
Registered User
iTrader: (7)
Join Date: Apr 2006
Location: Southern Kalifornia, 91732
Posts: 4,124
Thanks: 10
Thanked 16 Times in 12 Posts
|
Re: FS: Custom front tube bumper
I forgot something, to sweeten the deal, I'll throw in my set of Hanneman glass fenders for free!
Come on guys! Help me clean out my garage!
__________________
2006 4X4 LE OR CST 7" Lift, RadFlo 2.5 coilovers, PRG Uppers, RadFlo 2.0 rears, Deaver 2.5 mini pack, 3" custom block, PRG traction bars, K&N Intake, 2* advance, Custom Supertrapp exhaust, XE mirror covers and door handles, 17X8 AR Mojave Teflon's, 35/12.50R17 Toyo Mud Terrains, Bushwacker fender flares, Custom one off front tube bumper. www.myspace.com/yellomantis |
|
|
|
|
07-22-2008, 09:54 PM
|
#11 (permalink) | |
|
Registered User
iTrader: (0)
Join Date: Mar 2006
Location: Central Valley, CA
Posts: 1,117
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: FS: Custom front tube bumper
Quote:
now that's a d@mn good deal if I ever saw one....
__________________
Radiant Silver '06 Titan SE CC 4X4 w/BT&OR w/ ATS Fender Flares PC 6" lift w/ PRG A arms & traction bars, SAW's front/rear combo & Deaver pack 34" Nitto Terra Grappler's on 17" Helo Maxx 6's Volant CAI, PowerAid TBS, Flowmaster 40 DECEPTICON center grill, SS Hood Deflector & Chrome Truck Nutz
|
|
|
|
|
|
07-31-2008, 05:42 PM
|
#12 (permalink) |
|
Registered User
iTrader: (7)
Join Date: Apr 2006
Location: Southern Kalifornia, 91732
Posts: 4,124
Thanks: 10
Thanked 16 Times in 12 Posts
|
Re: FS: Custom front tube bumper
Bump back to the top!
__________________
2006 4X4 LE OR CST 7" Lift, RadFlo 2.5 coilovers, PRG Uppers, RadFlo 2.0 rears, Deaver 2.5 mini pack, 3" custom block, PRG traction bars, K&N Intake, 2* advance, Custom Supertrapp exhaust, XE mirror covers and door handles, 17X8 AR Mojave Teflon's, 35/12.50R17 Toyo Mud Terrains, Bushwacker fender flares, Custom one off front tube bumper. www.myspace.com/yellomantis |
|
|
|
|
08-01-2008, 09:51 AM
|
#14 (permalink) | |
|
Registered User
iTrader: (7)
Join Date: Apr 2006
Location: Southern Kalifornia, 91732
Posts: 4,124
Thanks: 10
Thanked 16 Times in 12 Posts
|
Re: FS: Custom front tube bumper
Quote:
__________________
2006 4X4 LE OR CST 7" Lift, RadFlo 2.5 coilovers, PRG Uppers, RadFlo 2.0 rears, Deaver 2.5 mini pack, 3" custom block, PRG traction bars, K&N Intake, 2* advance, Custom Supertrapp exhaust, XE mirror covers and door handles, 17X8 AR Mojave Teflon's, 35/12.50R17 Toyo Mud Terrains, Bushwacker fender flares, Custom one off front tube bumper. www.myspace.com/yellomantis |
|
|
|
|
|
08-01-2008, 11:29 AM
|
#15 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Jun 2008
Location: Odessa, Tx
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: FS: Custom front tube bumper
hey mantis ive posted another thread asking what brand of bumper this was. It has the arb looks and its on 4x4parts.com
__________________
"I feel alot more like i do now than i did when i first got here" |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Change a Se front bumper to a LE Chrome front bumper | malawi | Titan Parts & Accessories | 5 | 04-12-2008 05:23 PM |
| PRG Trip part 2...DMZ Trip part 1..New Custom Tube bumper | Shadowofnight2001r | Titan Suspension | 16 | 01-18-2008 02:18 PM |
| Custom tube bumper, stage one: | Yellomantis | Titan Parts & Accessories | 19 | 07-20-2007 09:53 PM |
| oil from breather tube up front | 305hp | Titan Problems & Dealer Service | 9 | 12-18-2006 09:17 PM |
| Custom Borla True Dual Equal Lenth w/X-pipe and Stillen Long Tube Headers | markislive78 | Titan Performance Modifications | 30 | 03-10-2006 08:50 AM |
All times are GMT -7. The time now is 05:32 AM.
 |
|
|