*****JBA 3" 304 stainless turn down kit***** - Nissan Titan Forum
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 9 (permalink) Old 04-28-2016, 04:29 PM Thread Starter
Supporting Vendor
Nissan Titan Status - Premium Member
 
nightowl's Avatar
 
Join Date: Mar 2011
Location: Shreveport, La.
Posts: 7,557
Thanks: 8,550
Thanked 3,837 Times in 2,344 Posts
Garage
iTrader Score: 136 reviews
*****JBA 3" 304 stainless turn down kit*****

I get calls all the time from customers that would like a 3" turn down in stainless to hook up to their JBA 3" Catback exhaust systems or any 3" exhaust on the market.

The item attached is 304ss with the clamp and can be installed in 20 minutes by anyone at home. This is for customers that don't want an over axle pipe and are looking for a deep loud tone or need the clearance for rock crawling or off-roading.

Part number is below and prices start at $40.00 shipped for the complete kit.
DEC300ATD.
Attached Thumbnails
*****JBA 3" 304 stainless turn down kit*****-image.jpg  

YOUR CRACKED MANIFOLD ONE STOP SHOP

-CUSTOM BPIPES
-JBA HEADERS
-JBA CATBACK
-AXLE VENT KITS
-2.5" CAJUN Y PIPES
-VIBRANT ULTRAQUIET RESONATORS
-CUSTOM TUNING "NO DYNO NEEDED"


http://www.cajunbpipes.com
UPREV INFO-CAJUNTUNING@GMAIL.COM
nightowl is offline  
The Following User Says Thank You to nightowl For This Useful Post:
Titan 05 (04-29-2016)
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 04-28-2016, 05:17 PM
Premium User
Nissan Titan Status - Premium Member
 
GalaxyPro4X11's Avatar
 
Join Date: Jan 2012
Location: Vancouver Island B.C, Canada
Posts: 2,164
Thanks: 1,470
Thanked 615 Times in 453 Posts
iTrader Score: 0 reviews
Re: *****JBA 3" 304 stainless turn down kit*****

I will probably try this out at some point.

Performance mods:
UPREV tuned by RB's Titan, MXP CAI, JBA 304SS headers ceramic coated jet black 2000 degree coating, 2.5 Resonated Cajun B-Pipes an catback with Borla 18" XR1

Suspension mods:
6inch stage 2 procomp, 1.5" spacer on extended travel bracket lifted Radflo Coilovers with PRG top hat, PRG UCA's, PRG Off-road trac bars, Deaver C-30's with 3" block an PRG adjustable shackles with bilsteins in the rear.
315-60R20 Toyo mud terrains with 20x10 -18 matte black fuel Vapors

Future Mods:
Level 10 trans when warranty runs out
Remote res rear shocks
Install my grizzly locker
GalaxyPro4X11 is offline  
The Following 2 Users Say Thank You to GalaxyPro4X11 For This Useful Post:
nightowl (04-29-2016), Titan 05 (04-29-2016)
post #3 of 9 (permalink) Old 04-29-2016, 03:30 AM
Registered User
 
TheHops's Avatar
 
Join Date: Nov 2014
Location: Clarksville, TN
Posts: 682
Thanks: 52
Thanked 162 Times in 134 Posts
iTrader Score: 3 reviews
Re: *****JBA 3" 304 stainless turn down kit*****

I've actually been looking for a 304ss turndown. I've been considering changing up my setup and this may fit the bill. I'll have to take some measurements and see if it'll work. Do you happen to know the overall length of this tip?



2010 Pro-4x CC [Blizzard White]
Suspension: 6 inch ProComp, ATX AX181 teflon wheels, 35x12.5R18 BFG KO2s, ICONs on all corners (no spacers), DK UCAs, DK tie rod ends, sway bar delete.
Power/Exhaust: UpRev by seymore4, Airaid MXP CAI, JBA LTs, catless bpipes, SummitRacing y-pipe, Borla 40085, UQ res.
Body: FabFours premium front bumper, Rigid LED grille, Bushwacker E-A-F flares, Go Rhino Dominator D2 steps, spray in bed liner.
Electrical: 9500lb Mile Marker SEC9.5 (ES), full internal and external LED swap, two 3" A/W pods, 20" A/W grille bar, Cobra 29 LX CB radio.
Misc: WeatherTech liners, hood and window deflectors, stubby antenna, in cab seat mounted fire extinguisher, cajun axle vent.
Pending Install: CJD trac bars, C-30s, DK variable height shackles, RKSport ram air hood, roof racks, more LED bars, JBA turnout
Wishlist: Reinforced camper shell, full size spare bed mount, complete electrical upgrade, FabFours premium rear, OBA, paint.
TheHops is offline  
post #4 of 9 (permalink) Old 04-29-2016, 08:25 AM
Registered User
 
LaxDfns15's Avatar
 
Join Date: Nov 2010
Location: Memphis, TN
Posts: 1,772
Thanks: 210
Thanked 470 Times in 349 Posts
iTrader Score: 4 reviews
Re: *****JBA 3" 304 stainless turn down kit*****

Can we get a video of this one too?

What's the sound like compared to JBA catback with no UQ?


2008 PRO-4X KC
Looks and Sound: No chrome, Leveled, Black Rhino Sidewinder 18x9's, 275/70/R18 Nitto Terra Grapplers, OEM modded headlights, RF system+Two Kicker Comp 12's, LED lights inside and out
Performance: AirAid MXP, UpRev, JBA LT Headers, Cajun B Pipes, JBA catback, Dirt King UCA's, Bilstein 5100's
LaxDfns15 is offline  
post #5 of 9 (permalink) Old 04-29-2016, 03:51 PM
Registered User
 
Join Date: Sep 2008
Posts: 333
Thanks: 147
Thanked 279 Times in 171 Posts
iTrader Score: 0 reviews
Re: *****JBA 3" 304 stainless turn down kit*****

Quote:
Originally Posted by TheHops View Post
I've actually been looking for a 304ss turndown. I've been considering changing up my setup and this may fit the bill. I'll have to take some measurements and see if it'll work. Do you happen to know the overall length of this tip?
7" is the overall length of the turndown.
Titan 05 is offline  
The Following 2 Users Say Thank You to Titan 05 For This Useful Post:
nightowl (04-29-2016), TheHops (04-29-2016)
post #6 of 9 (permalink) Old 04-29-2016, 07:09 PM Thread Starter
Supporting Vendor
Nissan Titan Status - Premium Member
 
nightowl's Avatar
 
Join Date: Mar 2011
Location: Shreveport, La.
Posts: 7,557
Thanks: 8,550
Thanked 3,837 Times in 2,344 Posts
Garage
iTrader Score: 136 reviews
Re: *****JBA 3" 304 stainless turn down kit*****

Quote:
Originally Posted by LaxDfns15 View Post
Can we get a video of this one too?

What's the sound like compared to JBA catback with no UQ?
A lot deeper and louder with some drone I'm sure. This is what is great as it can be easily removed and replaced as the mood changes...lol

YOUR CRACKED MANIFOLD ONE STOP SHOP

-CUSTOM BPIPES
-JBA HEADERS
-JBA CATBACK
-AXLE VENT KITS
-2.5" CAJUN Y PIPES
-VIBRANT ULTRAQUIET RESONATORS
-CUSTOM TUNING "NO DYNO NEEDED"


http://www.cajunbpipes.com
UPREV INFO-CAJUNTUNING@GMAIL.COM
nightowl is offline  
The Following User Says Thank You to nightowl For This Useful Post:
seymore4 (04-29-2016)
post #7 of 9 (permalink) Old 04-29-2016, 08:23 PM
Registered User
 
TheHops's Avatar
 
Join Date: Nov 2014
Location: Clarksville, TN
Posts: 682
Thanks: 52
Thanked 162 Times in 134 Posts
iTrader Score: 3 reviews
Re: *****JBA 3" 304 stainless turn down kit*****

Quote:
Originally Posted by nightowl View Post
A lot deeper and louder with some drone I'm sure. This is what is great as it can be easily removed and replaced as the mood changes...lol
I'm debating on switching my current setup with a better y-pipe, an xr-1 and this tip. No UQ. I like to live dangerously.



2010 Pro-4x CC [Blizzard White]
Suspension: 6 inch ProComp, ATX AX181 teflon wheels, 35x12.5R18 BFG KO2s, ICONs on all corners (no spacers), DK UCAs, DK tie rod ends, sway bar delete.
Power/Exhaust: UpRev by seymore4, Airaid MXP CAI, JBA LTs, catless bpipes, SummitRacing y-pipe, Borla 40085, UQ res.
Body: FabFours premium front bumper, Rigid LED grille, Bushwacker E-A-F flares, Go Rhino Dominator D2 steps, spray in bed liner.
Electrical: 9500lb Mile Marker SEC9.5 (ES), full internal and external LED swap, two 3" A/W pods, 20" A/W grille bar, Cobra 29 LX CB radio.
Misc: WeatherTech liners, hood and window deflectors, stubby antenna, in cab seat mounted fire extinguisher, cajun axle vent.
Pending Install: CJD trac bars, C-30s, DK variable height shackles, RKSport ram air hood, roof racks, more LED bars, JBA turnout
Wishlist: Reinforced camper shell, full size spare bed mount, complete electrical upgrade, FabFours premium rear, OBA, paint.
TheHops is offline  
post #8 of 9 (permalink) Old 04-30-2016, 08:46 AM
Registered User
 
LaxDfns15's Avatar
 
Join Date: Nov 2010
Location: Memphis, TN
Posts: 1,772
Thanks: 210
Thanked 470 Times in 349 Posts
iTrader Score: 4 reviews
Re: *****JBA 3" 304 stainless turn down kit*****

Hmm. Might get this and keep my tailpipe to get the UQ on it for when I travel with people. Everyone else hates the noise but I can't bring myself to get the UQ just yet.


2008 PRO-4X KC
Looks and Sound: No chrome, Leveled, Black Rhino Sidewinder 18x9's, 275/70/R18 Nitto Terra Grapplers, OEM modded headlights, RF system+Two Kicker Comp 12's, LED lights inside and out
Performance: AirAid MXP, UpRev, JBA LT Headers, Cajun B Pipes, JBA catback, Dirt King UCA's, Bilstein 5100's
LaxDfns15 is offline  
post #9 of 9 (permalink) Old 05-01-2016, 09:17 AM Thread Starter
Supporting Vendor
Nissan Titan Status - Premium Member
 
nightowl's Avatar
 
Join Date: Mar 2011
Location: Shreveport, La.
Posts: 7,557
Thanks: 8,550
Thanked 3,837 Times in 2,344 Posts
Garage
iTrader Score: 136 reviews
Exactly what I would do
nightowl is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Nissan Titan Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Jump to top


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



  Similar Threads
Thread Thread Starter Forum Replies Last Post
JBA 36400s 304 header review nightowl Titan Performance Modifications 3 02-11-2017 10:25 AM
Looking for 304 Stainless B pipes retrogun Buy/Sell 3 09-23-2014 08:07 AM
PerformanceVH 304-stainless bedhooks! StormTroopin Titan General Discussion 13 02-22-2013 10:44 AM
F/S or trade, almost new JBA 3.5"x12" chrome plated stainless exhaust tip. sudden urge Buy/Sell 1 02-17-2008 09:25 PM
Zoomers Group Buy (New 304 Stainless) Aperformance Titan Performance Modifications 111 06-08-2006 12:11 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On