How do I get Tar off of a White 04 Titan?

[sandman65]

i guess I drove thru a a few construction zones and now I have tar all over the side of my Titan...what is the best product to remove this stuff without ruining my paint job. Targone by Turtlewax..sucks...helps please I can not enjoy my driving experience until I am riding clean again. Thanks in advance.

[Kronos1965]

Originally Posted by sandman65

i guess I drove thru a a few construction zones and now I have tar all over the side of my Titan...what is the best product to remove this stuff without ruining my paint job. Targone by Turtlewax..sucks...helps please I can not enjoy my driving experience until I am riding clean again. Thanks in advance.

Goo off-wash it afterwards...

[TitanTeamRoper]

I used a bug and tar remover from Wal-Mart when it was fresh. But if it is like mine (been on my truck for months), I need to use a clay bar to remove it.

[Skyboi]

To be honest... One of the best and safest tar removers is KEROSENE. or GAS.

Gas drys too fast....

Fill up a spray bottle with some and add 1/2 oz of carwash soap to keep it from drying out...

After you've washed your truck of course....Mist the whole truck down and wait a minute....This will allow the tar to slightly run (so you can see where it is).

Next, go section by section with a soft nonabrasive bug/tar sponge.

If you can, let the product do the work...Don't be too eager to scrub it off...Let the stuff work for you. Work your way over the truck.

When done, Give it a final wash and hit it with a clay bar to get off any fallout and you're ready for wax.

There are some "citrus based areosol degreasers" that work really well also, but if you have a lot of tar you'll go through several cans. @ $6.99 a can...Kero or gas is cheap

Good luck and let us know how you made out so we can help other members.

[Kronos1965]

Originally Posted by Skyboi

To be honest... One of the best and safest tar removers is KEROSENE. or GAS.

Gas drys too fast....

Fill up a spray bottle with some and add 1/2 oz of carwash soap to keep it from drying out...

After you've washed your truck of course....Mist the whole truck down and wait a minute....This will allow the tar to slightly run (so you can see where it is).

Next, go section by section with a soft nonabrasive bug/tar sponge.

If you can, let the product do the work...Don't be too eager to scrub it off...Let the stuff work for you. Work your way over the truck.

When done, Give it a final wash and hit it with a clay bar to get off any fallout and you're ready for wax.

There are some "citrus based areosol degreasers" that work really well also, but if you have a lot of tar you'll go through several cans. @ $6.99 a can...Kero or gas is cheap

Good luck and let us know how you made out so we can help other members.

Just thinking that hitting a truck with kerosene or gas and then having something ignite the fumes = flambe Titan!

[Skyboi]

Originally Posted by Kronos1965

Just thinking that hitting a truck with kerosene or gas and then having something ignite the fumes = flambe Titan!

Did it for 10 years...never had a problem. A little soap and rinsing with water works perfect...

I wouldn't take a smoke break til you were done though...

[Just-in]

Originally Posted by Kronos1965

Just thinking that hitting a truck with kerosene or gas and then having something ignite the fumes = flambe Titan!

wouldn't that be some **** to hear a whoooof turn around and the truck is all blistered lol

[TecheTitan]

Also, you can use WD-40. It will take tar right off and isn't quite as volitile as gasoline.

[kewlkarim]

WD-40 will strip down your clear coat and paint.
I wouldn't do it. i would follow the gas + soap method.

[Soonerdude]

Originally Posted by kewlkarim

WD-40 will strip down your clear coat and paint.
I wouldn't do it. i would follow the gas + soap method.

I didn't know that about WD-40. I used to use the Wal Mart bug and tar remover. If I remember right, the ingredients for that were the same as WD-40, so I switched. I usually re-wax after cleaning the tar off. Does anyone know why gas or kerosine is safer? WD is mainly toluene if I remember right.

[mick3643]

I use pb, it takes tar off great and its a really good lube for rusty bolts.

[Skyboi]

Experiment all you want..... But if you want an inexpensive tried and true way to easily remove the tar from your vehicle without excessive harsh scrubbing, Take a quart bottle of Kerosene and mix a half ounce of carwash soap in it and go.

If you want to loosen all the things that have an adhesive base to it like say..... Your trim mouldings, mudflaps, pinstripes, emblems...I could go on...

Then I say go ahead and experiment

I'll run a thread on how to re-apply those things

Proper tool for the job!

[albonismo]

scrape it off with a steak knife...kidding

[Soonerdude]

I must bow down before Skyboi. That was the easiest method for tar removal I've ever used. I'm a believer...can I get and AMEN!!

[Skyboi]

Originally Posted by Soonerdude

I must bow down before Skyboi. That was the easiest method for tar removal I've ever used. I'm a believer...can I get and AMEN!!

AMEN TITAN BRUTHA.... Like I've said before....The right tool for the job is everything...

Glad it as easy for you as I said it was....

Now tell me something.... You sprayed it on....Let it sit for say 15 -30 seconds and saw it start to melt...Then it happened.

You smiled and said..."Hey it's working....Skyboi was right...This is awesome"