Impressed with Adams products

luvbelly · 07-01-2008, 02:43 PM

The weather finally co operated today and I got a chance to try out some of the Adams products I bought a while back. Incredibly easy to use and impressive results. I started with the swirl and haze remover, followed with the revive polish, and finished with the buttery wax. All three steps including wash time took about 3 hours. I took a couple required barley pop breaks and once done spent about a half an hour walking around the truck. I was amazed that even I could get such great results. I did everything by hand and can't even imagine what thier power products would do. Thanks for a great product line.

**nytitan1** · 07-01-2008, 04:40 PM

wow truck looks great stuff really works well huh might have to order some proof in the pudding so to speak.

USN HM 350Z · 07-01-2008, 06:27 PM

very nice results. I may try out those power products and see how well they work.

**ArmyAviation** · 07-01-2008, 06:29 PM

looks nice luvbelly! only if I could do mine now, maybe tomorrow

luvbelly · 07-01-2008, 07:00 PM

Quote:

Originally Posted by USN HM 350Z

very nice results. I may try out those power products and see how well they work.

I considered this as well. They have a full line and offer a pretty good deal on the PC buffer. All the products I used are hand applied. I would like to try the power products but have always been a little worried about it. I am not sure how easy it is to burn or remove paint and I am not anxious to find out. It's only a matter of time until I surcome and give it a try.

**ArmyAviation** · 07-01-2008, 07:12 PM

Adams is a professional polish, it leave no dust from the polish and you can use it in the direct sunlight

USN HM 350Z · 07-01-2008, 08:04 PM

Quote:

Originally Posted by luvbelly

I considered this as well. They have a full line and offer a pretty good deal on the PC buffer. All the products I used are hand applied. I would like to try the power products but have always been a little worried about it. I am not sure how easy it is to burn or remove paint and I am not anxious to find out. It's only a matter of time until I surcome and give it a try.

As long as you are using the PC and follow some of the detailing guides for it, you shouldnt be worried.

Just do like I did, use friends cars to practice on

SeahawksTitan · 07-01-2008, 08:52 PM

I got the VRT and finally had a chance to use it on the plastic cowl piece under the front window of my Titan - it has been faded out and nasty looking since I got the truck...this stuff worked wonders -VERY impressed. I used the foam pads to work it in, and it really revives the plastic back to a rich looking black, and most importantly it dries evenly. I even threw some on my wife's tires on her Mazda 3 and was really impressed at the nice CLEAN black shine it gives the tires. Easy to put on, looks great, and doesn't have that cheap "slimy" look to it.

Your pics look amazing and I'm definitely sold on the Adam's products - after seeing those pics I will def. be ordering the wax etc.

**Nissan Mike** · 07-01-2008, 09:40 PM

Truck looks awesome,don't forget to try the Adams Undercarriage Spray also.

Viking606 · 07-02-2008, 04:58 AM

Quote:

Originally Posted by Nissan Mike

Truck looks awesome,don't forget to try the Adams Undercarriage Spray also.

Oh yes, this stuff is great!

luvbelly · 07-02-2008, 07:01 AM

Quote:

Originally Posted by Nissan Mike

Truck looks awesome,don't forget to try the Adams Undercarriage Spray also.

You read my mind. After I got most of my Titan all purrrrrrty....I was looking at the wheel wells and undercarriage. No matter how much scrubbing you do they always have a brown tint to them. I am going to have to order and try some of this product.

**P's Titan** · 07-02-2008, 07:11 AM

Quote:

Originally Posted by luvbelly

I considered this as well. They have a full line and offer a pretty good deal on the PC buffer. All the products I used are hand applied. I would like to try the power products but have always been a little worried about it. I am not sure how easy it is to burn or remove paint and I am not anxious to find out. It's only a matter of time until I surcome and give it a try.

If you get the one linked on our site you wont hurt the paint. Ask Nissan Mike about the PC and how well it works, Mike questioned the machine and someone pushed so hard on his hood the machine stalled but not a mark on the paint.

Thanks for the kind words! Glad everything turned out well for you.

**roy365** · 07-02-2008, 07:44 AM

Looks good.

Did you remove your taillights you installed?

luvbelly · 07-02-2008, 05:42 PM

Quote:

Originally Posted by roy365

Looks good.

Did you remove your taillights you installed?

You are an observant man sir!! Yup, I pulled them and went with a red LED set instead. The clear lens tails had lost two rows of three LEDs on the passenger side. I may attempt a repair some day when I get a chance.