Irish125

So the yellow and purple wire you just cut and run in and out of the relay and the blue and black wire you just tap into and run to the relay and then the green wire you run from terminal 7 on relay to the factory locker switch (and where again do I hook it up on the factory locker switch) so not tryin to bug the s*@# out of you about it

Ok I may hey be stupid but still not understanding real well do you have text messaging.and.can text.me my number is 3364697896

One more question in the diagram it says wires from dlcu going into relay then shows wires going to dls is that just in line or do I need to run separate wires to that I'm not really electrical each when it comes to tapping into pre existing wires

Ok cool thanks I just joined the form thurs so still not 100% sure of how to use it but thanks I'm gonna give it a try

Hey had a question about your elock mod when you went back and wired it to the factory switch is it just the green wire you ran to switch or you still had to put in the dlc thing or what ever was involved in.first mod? Also do you happen to have a pic of where you ran the wire in on the back of the factory elock switch?

Whazzup man!!

I know you researched it, but i found this helpful... Search : Loud THUMP in right front end.

Thanks for the reply...if you do find out anything.... please let me know...i'll do the same...take care

having the same issue.... smooth bumps no problem....when I hit a quick bump it rattles...and it's driving me nuts...I did install a levelling kit last week...just wanted to know if you figured out your issue..Thanks