Hawaiianbasshead

Did you ever get the brake lights figured out. I am having the exact same problem. Checked everything. Looking at brake switch, but still can't seem to find a solution. Any help is greatly appreciated. Thanks.

I had headlight covers on, lost um in a drive thru car wash LOL, they suck, couldn't see your lights to drive at night even high beam, I drove at night with my fogs.. I would not recommend them to anyone unless on a show car not driven, no way could you see the blinkers on coming...

howd you get your headlights blacked out? is it legal??

ho, lost ur number, 640-2540 Tom

they sell them at napa and autozone or whatever it's called, I got a set right now if you want them lmk, I don't even remember what it costed, I drilled it out already so it's ready to bolt on...

howzit, im from kona and i talked to you before, i need some help getting rid of cel on stillen LT headers wit stillen high flow headers. im not sure if my mechanic put the stillen 02 simulator on. where did you buy the defoulers and did put them on all the 02 sensor? mahalos

traded them, the guy who has them doesn't want to sell them...

Hawaiianbasshead have you sold your 16.5x14 mountain crushers yet? i have been looking for a set like those. If they arent yours could you pass a message along to whoever owns them if they still have them please.

thank you

hey, don't come on here often. they do rub, but they mostly rub the frame I think. I did the pinch weld mod. and my rims have a really positive offset 5.79" iirc so they tuck in close to stock. I don't get any rub on spindle or UCA... I hear the mud grapplers are wider tho and stock rims are MORE tucked in so you may have issues I don't know.. start a thread. plenty of guys ran mud grapplers on stocks before with just leveling kits I believe so you "should" be fine as far as I know...

Me and you have about the same setup. I just put 08 Pro4x coilovers on and got another 1.5" of lift. So I am around 6.5 in the front with everything. How do your 35's fit? I am taking the XD's off the titan and putting the stock LE's on with some new 35X12.50R18 Mud Grapplers and I am worried that they are gonna rub like a sum *****. I figured I would see how your set up works. I am more concerned with contact with the spindle and upper control arm.

um, 4wds are a little higher stock. and from what I've compared my truck to other 4wds mine was kinda higher stock since I have the OR package... so I'm not sure how far over stock it is. I have a 2.5" spacer and bodylift so 5.5" over stock up front. the one ur talkin bout must be chieflikalotapus? the fiji blue one with the 33s on 20"s? his is around the same height as mine. I think u should start with the spindles then add a 2.5" leveling spacer. or even get the spacer 1st since it's the cheapest and go from there. the best way to see if u want more is to add it little by little imo. I want more but also don't wanna run 33"s so I can get some power back. so it's a toss up really for me. I think I'll keep the height I got and get the 33x14 or 15.5"s eventually for now I'm gonna get some smaller 35"s, so I don't have to get different rims. its a money pit at best lol.