HAYNBOI96743

Thanks For the Compliment. I had to do a MAJOR PINCH WELD to fit the 35 x 12.5 Nitto Grapplers's with 4.56 backspacing. If I could do it all over again, id get my body lift first or the c/o and then throw on the 35's. But back then I wanted to fit those puppies in asap! the 2wd spindle lift isn't as high as the 6inch fabtech or procomp(not sure?) so the backspacing you have to be cautious. My buddies 4wd was an inch higher then mine and he had the 35 toyo's and 6 inch fabtech. Hope this helps...

Im not sure on the offset, but I had 33" toyo m/ts on mine befor with these rims, and with the 4 inch spindle plus the 2.5 spacer it was perfect! No rubbing. When I went up to 35's I had to cut the fender on the bottom and some of the pinchweld. So You should be ok! And no still havnt sold it

Do you want to buy my lift or wheels?

Hey thx brotha..... My wheels are the 20" eagle alloys and I think the backspacing is -25 or something like anyway they are the 064 series. With all the lift I'm like at 5.5" and my wheels do not rub. I actually got a good deal on them I bought them off of eBay brand new for $700 shipped to my house and the tires I got them from a member here for about $700 not bad for the combo