Phoenix Arizona Dynanometer Day - Bring whatever

[faith+1]

Thanks to SF Titan - seems he found a great deal for us if we get 10 people to go to Tempe and do 3 pulls for $50.00. The location should be:
Pro Dyno Store
480-967-5550
1721 W. 10th Place
Suite 4A
Tempe, AZ 85281
TIME IS from 9:00 to 12:00 Saturday November 10th.

http://www.prodyno.com/Home/Contact.aspx
*Sftitan will vaildate this is the place*
NO ALL WHEEL DRIVE VEHICLES.. just making it clear.

The timetable for the Dyno's is after it cools down a bit I believe, but we can discuss this as we go along. I also believe that if you wanted to Dyno another vehicle its all good, as long as we got 10 vehicles we are set :-) Ask your friends, family whatever if we get a list and set a date we are good to go.

I will create a List of people that are in to do this.


List - Need 10 Minimum.
1 Faith+1 - Kevin *Confirmed*
2 Sftitan *Confirmed*
3 rynomx785 *Confirmed*
4 Army of 5 *Confirmed*
5 RyuTan *Confirmed*
6 SmokedTiresITAN *Confirmed*- He has to work at 12 on saturday so would need to do his runs before he works
7 EonBlue *Confirmed* Said he has a friend going?
8 Phoenix Titan *Confirmed*
9
10

***NOT SURE LIST***
GM Enthusiast
Titan814
chet2575
BigDaddi602


Thanks all.

[rynomx785]

Im in. hopefully have uprev or vk pro by then. I think he said it was pro dyno in tempe.

[faith+1]

Originally Posted by rynomx785

Im in. hopefully have uprev or vk pro by then. I think he said it was pro dyno in tempe.

I want to make sure, have him give me the address / phone / contact so I dont screw it up lol.

Yah I want to run a "Baseline" w/o the VK, then one with it in, and another with it in.

*and Yah.. I wanted to be weird so I named the thread Dynamometer day instead of Dyno day lol.

[rynomx785]

Send him a PM. I think hes still online. Id like to do a before and after with the VK PRO too.

[GM Enthusiast]

Count me in. Depending on when exactly it'll happen, and my financial situation between now and then, it'll either be a baseline run, or I might have a few mods done already.

[Max Power]

ProDyno has been a decent shop for a long time - I used to know some of the people way back (99-01) but now my fun cars are all AWD so I don't really go back there. Pretty well established so you should have no worries.

[sftitan]

yeah all the info is correct. sorry but no dyno for all wheel drive though. anything else bring it. they also have a cai they make in shop im gonna buy. first run with aem, then install theres then dyno again. from what they say its bad ***. ive seen it and ive never seen one like it before. really good idea though. so you might wanna bring some more money.ha ha.

[sftitan]

oh im in for whenever though as far as time

[rynomx785]

How much is there intake? And what were they claiming as far hp and tq?

[sftitan]

im not sayin

[sftitan]

oh and i dont think the filter falls off. but it wont work with my tube either

[rynomx785]

Hey D!CK!!! my filter doesnt fall off any more. Got it tight now. Next time I ride in your truck Im gonna "accidentally" spill a whole beer on your seat! I think you did it on purpose because you jealous my truck is better than yours!

[sftitan]

to tell you the truth i pissed my self but i guess it is still beer in the seat though

[RyuTan]

Add me to the list. I am curious to see what my numbers are. Thanks for getting things organized.

[faith+1]

Originally Posted by RyuTan

Add me to the list. I am curious to see what my numbers are. Thanks for getting things organized.

great!! Only 4 more to go.. then the tough part

scheduling a day haha.