Center Console Ice Chest - Page 3

**bills1974** · 01-01-2008, 07:43 PM

Quote:

Originally Posted by MuskyHunter

Another solution would be to go build a dry cooler by insulating the center console and install thermoelectric cooling modules, like what is used with 12 volt coolers. Modules could be mounted on the lid or sides.

http://www.ferrotec.com/products/the...FSONQAodGxiyMg

I was actually thinking the same thing, you could very easily tap into the cigerette lighter in the back of the console for power without exposing any wires...

MXtitan24 · 05-27-2008, 11:48 PM

Quote:

Originally Posted by MuskyHunter

Another solution would be to go build a dry cooler by insulating the center console and install thermoelectric cooling modules, like what is used with 12 volt coolers. Modules could be mounted on the lid or sides.

http://www.ferrotec.com/products/the...FSONQAodGxiyMg

G-damnnn

someone PLEASE do this!!!!!!!!!!!!
i want it so bad
but all the big words scare me from trying

CLAREMONTTITAN · 06-01-2008, 02:38 AM

I started to do it today. I figured what a better+ easier way to close the old factory screw holes than to duct tape the outer side of the removable black bin and put some sort of super glue. i used gorilla glue. it didnt dry though so i have to wait for that until tomorrow. One suggestion though. Specify where exactly to drill the hole. That was the only part i was confused about. That and the fact that the rubber matting on the bottom of the center console is removable. My dumb --- started to cut it with a razor blade. Im excited though to finish. stay posted until tomorrow for pics. Ill put up some nc17 pictures. hhaha

TEBER111 · 06-01-2008, 05:19 AM

In the words of that chick on Napolean Dynamite "I want that". Killer mod!!!!

CLAREMONTTITAN · 06-01-2008, 10:16 PM

i seemed to have partied a bit too hard last night and woke up hung over at 3 p.m. so i didnt get started until about 5:00 the glue just about finished drying. Everything is fine now but the only thing i am worried about is that little 1/4" slippin through the hole i drilled. If that happened my truck would be smellin like a DMV after about a week

razorvines · 09-12-2008, 01:31 PM

It isn't the sugar in the redbull that makes your heart explode.....

How about trying a mini kegerator next??

MXtitan24 · 03-04-2009, 06:22 PM

anyone willing to help me do the fridge mod?

yeggsfab · 03-04-2009, 10:06 PM

next time your in Oceanside hit me up and i can help you... i made it all up ahahh

MXtitan24 · 03-04-2009, 11:10 PM

Quote:

Originally Posted by yeggsfab

next time your in Oceanside hit me up and i can help you... i made it all up ahahh

I work at camp pendleton right now so I will drop you a line. You got the refrigerator module thing in there too now?

yeggsfab · 03-06-2009, 10:43 AM

nah i bought one of those 12 volt coolers and tried to put it in there and there was soo much stuff that needed to be in there.. Ice is way easyer

MXtitan24 · 03-06-2009, 05:45 PM

alright next time I'm down there let's do it. do you get hassled for your windshield tint at all?

yeggsfab · 03-06-2009, 10:14 PM

Not Yet i love it though! You cant see anything past my knuckles on the steering wheel.. one of the best things i have done to my truck so far besides the Trac Bars i made...

MXtitan24 · 03-07-2009, 12:06 PM

Quote:

Originally Posted by yeggsfab

Not Yet i love it though! You cant see anything past my knuckles on the steering wheel.. one of the best things i have done to my truck so far besides the Trac Bars i made...

I think that's going to be my next mod. btw anyone have any ideas on how to enclose the hole in front of the center console to make it a second center console and an ice chest

wvtitan08 · 03-07-2009, 03:34 PM

That's one of the best mods. But, I don't think I will try it. I dont think it would work well with the dvd player. LOL

TechTITAN08 · 03-08-2009, 01:00 PM

If anyone can figure out a way to install the electric module thing I would be sold instantly.
great mod tho!