ARB FRONT BUMPER Help!!!

Russell · 07-25-2004, 08:35 AM

Hey everyone I emailed ARB the other day
"To Whom it May Concern,
I was wondering if you have any future plans on making any products for a Nissan Titan. I am especially Interested in a Sahara Bull Guard. If you could give me any info or feedback I would greatly appreciate it. I use to own a Jeep and loved your products. Thanks Again."

And this is what I recieved back

Joshua,
We do not yet have any plans to build a bumper for the Nissan Titan, however we are starting to receive more requests, so we may build one in the future.
We will add your email to our request file which is used to help decide which products we build in the future.

Best Regards,

Tim Lund
Tech Supervisor
Engineering Assistant
Air Locker, Inc.
206-264-1669
20 So. Spokane St.
Seattle, WA 98134
tlund@arbusa.com

If you all dont know what I am talking about and have no Ideal what a ARB bumper looks like I have attached a photo at the bottom. It keeps everything in place lights and airbag sensors and so on. The biggest turn on is that it is made out of steel rather than plastic so a little fender bend wont be anything to the truck. Some models come with a built in winch that is hidden away and I think that the bumper will protect your truck a hell of alot better than a bull bar.

What I need help with is emailing these people and getting them to consider building us one. They probably have some magical number that they need to even consider makeing one. Well Thanks guys in advance in Helping me out.
Josh

greg w · 07-25-2004, 08:56 AM

Re-attach the photo please.

bestatchess · 07-25-2004, 09:06 AM

They might have a magic number of trucks sold before they get interested.

vw1972bugs · 07-25-2004, 09:41 AM

I think that this bull bar/bummper would be a little bit much unless you are a HARDCORE off roading junky. I bet this setup is over $1000

kvoman · 09-02-2004, 01:01 PM

Newbie here but another alternative to the ARB Bull Bar is the TJM Bull Bar (T-17 or similar). Same look and capability but about half the cost. The more inquiries to them, the more incentive for them to start building it.

I don't own one yet but it's a given that a Titan (SE with Offroad 4x4 package) is in my future. I would need to have the TJM bull bar to complete the E-locker package for 4wheeling. I still have my 9000lbs Ramsey from my old truck that's sitting on the floor waiting to be resuscitated. It has to have a real bull bar to house my winch, the Westin or any other bull bars just won't do it for me since you loose ground clearance and they do nothing else!

iamtroybenson · 02-07-2005, 10:52 AM

I wrote ARBusa about a winch bumper and less then an hour later got this response

"We do not yet have a bumper for the Nissan Titan. We are looking at the Titans and may be building something in the future.

I'll add your request to our request file, which is used to help decide which products to build in the future."

92TripleBlack · 02-07-2005, 07:22 PM

Here's mine:
We have no timetable yet. It will be difficult as these vehicles are not sold in Australia where all of our design and manufacturing is done.

Jim Jackson President ARB-USA
20 South Spokane St
Seattle, WA 98134
Tel: 206 264-1669
Fax: 206 264-1670
The truth comes out. Keep bugging them.