Anyone know were to find these wires. aftermarket nav

[RCtitan04]

Hello all,

I was wondering if you know were to find these wires.
Im installing a Pioneer Avic-N1

I'm looking for the speed sensor wire location, And the color.
Also the Reverse lights somewere in the vehicle, and also the color. found them outside but yikes what a chore.

Any help, would be great..
Thanks
Ron

[phillipyang]

I opened mine up yesterday to do some other work with my MP3 intergration and I found some other wires, possibly for the navigation but it was near the bottom of the emergency light button. Try checking those wires or it can be behind the CD system tucked away.

I pulled those wires out and activated the airbag sensor in my dash so I screwed it over. I'll be sending the truck in on monday to get it fixed

[zpylot]

Connector M98, pin 24 is the AV Switch. If you have the PDF manual look at page 26 of the PDF file for the AV section. This is the line that feeds the speed-sensitive-volume control.

I used this on my Kenwood DDX7015 and it works.

[llajumpvid]

Originally Posted by phillipyang

I opened mine up yesterday to do some other work with my MP3 intergration and I found some other wires, possibly for the navigation but it was near the bottom of the emergency light button. Try checking those wires or it can be behind the CD system tucked away.

I pulled those wires out and activated the airbag sensor in my dash so I screwed it over. I'll be sending the truck in on monday to get it fixed

No need to go to the dealer check the FAQ secdtion for resetting the airbag light.