where to find airbag reset info?

[JMC]

I have tried 4 different members version of the airbag reset procedure.... Does anyone have the actual file from the service manual? I would like to see the real thing. Thanks!

[zpylot]

This is an exerpt from page 37 of the SRS chapter. This is what worked for me.

<exerpt>
TROUBLE DIAGNOSIS
SRS-37

Trouble Diagnosis Without CONSULT-II EHS000V0
DIAGNOSTIC PROCEDURE 6
Inspect SRS Malfunction Using "AIR BAG" Warning Lamp—Diagnosis Mode
NOTE: SRS will not enter Diagnosis mode if no malfunction is detected in User mode.
1. Turn ignition switch ON.
2. After “AIR BAG” warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 two more times (3 times total).
5. Turn ignition switch ON. SRS is now in Diagnosis mode.
</exerpt>

Now the system is in diagnostic mode. To leave diag mode turn the ignition off and wait 5 seconds. Turn it back on and the light will operate normally.

[JMC]

Thanks Zpylot!