Stock fog light holes...what aftermarket one will fit perfectly?!

[Titan_TX]

Guys, I rather not go with the cheap stock ones and get something that is really high power and that fits in those holes. Also fills them in good like the factory ones. Has anyone installed any aftermarket ones with pictures that I can check out? I want some serious power out of those so I am looking at good quality ones.

[Squid]

Someone will be along soon to ask you to do a search on fog lights.

[Kmu]

I would just replace the Factory fog light bulb with a Sylvana Silverstar Fog Light...

[OnebadSE]

Originally Posted by Titan_TX

Guys, I rather not go with the cheap stock ones and get something that is really high power and that fits in those holes. Also fills them in good like the factory ones. Has anyone installed any aftermarket ones with pictures that I can check out? I want some serious power out of those so I am looking at good quality ones.

I understand you not wanting the stock ones but, I have to tell you, I was pleasantly surprised by the effectiveness of the factory fogs. Most of the time, factory fogs are for looks only. But these things actually work very well. And they even come stock with what I'd call underpowered 32W bulbs. Up those to a higher wattage and they can only get better. The stock look of both the lights themselves and the switch on the stalk are well worth the under $300 price of admission IMHO.

[Hatchman]

Yep, I got the factory fogs, they do a good job. I like the fog light switch being on the stalk, too, plus fit is great. I'd be scared to bump up the wattage too much, melting wires and lenses...

Plus, I got them thrown in for free, so the price was hard to beat!

[TITanASS]

I'm also looking for a fog light kit, I do like the idea of the controls on the stalk, but not the price. Let me know if you install any aftermarket ones that you like.

[JBWilkins]

PIAA's 510's should fit if you are looking for fogs.....they have a small enough diameter>>>>

[pciley]

Be careful with the higher wattage bulbs. I switched the bulbs and they bubbled the plastic lenses. I rather have a lamp with a glass lense. It will get less discolored with age and exposure and wont MELT.
Someone like PIAA doesn't make a fog lamp that will fit in the hole?

[SiMaster 2003]

Have the best of both worlds. Get the aftermarket lights and go get the stalk at the stealership. Then splice into the plug for the lights down there in the bumper. Wire that splice into a relay voila, not only do you have much brighter lights but it's all controlled with the factory stalk.
As far as brightness, the factory fogs are nice however, I lined up with a titan tonight that had the stock fog lights and mine completely blanked his out. With the aftermarket setup, if you do want to step up to a 100 watt bulb the relay will allow up to 130 watts each so your set.

[gero]

Which aftermarket fog lights did you install?
Any photos?

Thanks,

gero

[tmoran]

bump, which lights Si master 2003?

[Squid]

Originally Posted by tmoran

bump, which lights Si master 2003?

Yes please do tell and are they driving or real FOG.
Thanks.