front bezel

HVACman · 09-10-2005, 11:15 AM

hi i was just wondering how to take off the front bezel piece where the head unit is located.

bestatchess · 09-10-2005, 11:21 AM

It is held by clips and just pulls off. Grab it at one corner and pull. After you get it off, you have to disconnect the various wire connectors. These have various different types of detents which must be released prior to pulling the connectors apart.

bking · 09-10-2005, 03:52 PM

Do be careful when putting the bezel back on. Take time and make sure the clips on each side go back in correctly. I didn't pay much attention to it the first time and ended up bending the clips inward as I tried to push the bezel back on. When it wouldn't go back on correctly, I pulled it off again and realized I had bent the clips. So I go to very carefully bend the clips back in place and two of them broke off. Luckily it didn't affect the way the bezel looks when it's back in place. Just a word of warning.

Titan4x4Aggie · 09-12-2005, 09:11 AM

Yeah, dont lose / break the clips. I've yet to find them online, and the stealer cant seem to order them, or they claim I have to order the entire part to get the $0.10 clips. I've yet to put my glove box assy back in because of 2 missing clips.

BS...

Sammy Sandbag · 09-12-2005, 09:19 AM

Quote:

Originally Posted by Titan4x4Aggie

Yeah, dont lose / break the clips. I've yet to find them online, and the stealer cant seem to order them, or they claim I have to order the entire part to get the $0.10 clips. I've yet to put my glove box assy back in because of 2 missing clips.

BS...

Yep, same thing happened to me. The interior trim pieces are the same way, dealer can only order the entire part. I got lucking and got a brand new glove box from another TT member.