 |
 |
|
|||||||
| Titan General Discussion General Discussion about the Nissan Titan. |
 |
|
|
LinkBack | Thread Tools | Rate Thread | Display Modes |
02-04-2007, 09:40 PM
|
#1 (permalink) |
|
Registered User
 iTrader: (3)
Join Date: Nov 2004
Location: Houston, TX
Posts: 5,291
 Thanks: 4
Thanked 0 Times in 0 Posts
|
Blendmount install photos
Hey, I haven't had time to do a nice write-up on this yet, but I've had a few requests for the raw pix. So here they are - I've written some captions on some of them, so that will help. Mike is selling them for $45, for everything you see in my pix! The install was a breeze once I figured out I needed to use the longer of the two stands! Make sure you use the 1" stand when you install yours, and the install will go very smooth!
 A lot of the pix in the gallery are from when I used the 3/4" stand which is why it looks like the blendmount is sitting on top of the mirror. Once I swapped it for the longer one, it worked perfectly and allows for complete adjustment of the mirror. I'm EXTREMELY happy with this mod!Here are the pix: http://picasaweb.google.com/erikhulse/Blendmount Last edited by AgTitan06; 02-04-2007 at 09:43 PM. |
|
|
|
02-05-2007, 06:51 AM
|
#3 (permalink) |
|
Registered User
iTrader: (0)
Join Date: May 2006
Location: North East New York
Posts: 184
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Very nice install!
Did you need a longer cable for the Scangauge than was originally supplied?
__________________
2006 LE KC 4X4 BT, Radiant Silver Prodigy Brake Controller Equalizer Hitch Scan Gauge II Firestone Air Springs Bridgestone Dueler A/T Revo's A.R.E. Z-Series Cap |
|
|
|
|
02-05-2007, 08:39 AM
|
#4 (permalink) | |
|
Registered User
iTrader: (3)
Join Date: Nov 2004
Location: Houston, TX
Posts: 5,291
Thanks: 4
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Quote:
|
|
|
|
|
|
02-05-2007, 03:59 PM
|
#5 (permalink) |
|
Registered User
iTrader: (-1)
Join Date: Feb 2004
Location: York PA
Posts: 1,820
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
what does it do?
__________________
1BadTitan BASICS: Black LE KingCab 4x4-Off Road Pkg-Utility Track Bed-Big Tow Pkg EXTERIOR: 10,000K HID Headlight Conversion-AVS Bugflector II-Wade In Channel Rain Gaurds-Smoke Headlight Reflectors-Shaved Emblems-Painted Red Calipers-Smoke Taillights-Stainless Nerf Bars-Shorty Billet Antenna-20% Tint-5" Exhaust Tip-DIY Custom 3rd Brake Light-Tailgate Assist-Custom Home Made Hitch Cover INTERIOR: Shortened Shifter-Nismo Pedals-Dynamat Everywhere-Factory Cointray-Carbon Fiber Accents ROLLERS: Stock OR 17's With Nitto Terra Grapplers 295/70/17 ENGINE & PERFORMANCE: PRG Lift Kit-Nismo Billet Oil Cap-Platinum Terminals-Fram AirHog Filter-Slotted Cross Drilled Rotors I.C.E.: Eclipse AVN2454-JL Audio TR650 6 1/2 Coaxials-JL Audio TR650 6 1/2 Components-Hardwired Radar Detecter-Add On Remote Start-MICRO Alarm Other Rides: 05 Suzuki GSXR-03 Suzuki Quadracer LTZ-400 
|
|
|
|
|
02-05-2007, 04:05 PM
|
#6 (permalink) | |
|
Registered User
iTrader: (3)
Join Date: Nov 2004
Location: Houston, TX
Posts: 5,291
Thanks: 4
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Quote:
ScanGaugeII Blend Mount by MGT Motorsports |
|
|
|
|
|
02-05-2007, 04:08 PM
|
#7 (permalink) |
|
Registered User
iTrader: (-1)
Join Date: Feb 2004
Location: York PA
Posts: 1,820
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Oh...See them always being talked about here, just havent bothered to check it out until now. Pretty cool.
__________________
1BadTitan BASICS: Black LE KingCab 4x4-Off Road Pkg-Utility Track Bed-Big Tow Pkg EXTERIOR: 10,000K HID Headlight Conversion-AVS Bugflector II-Wade In Channel Rain Gaurds-Smoke Headlight Reflectors-Shaved Emblems-Painted Red Calipers-Smoke Taillights-Stainless Nerf Bars-Shorty Billet Antenna-20% Tint-5" Exhaust Tip-DIY Custom 3rd Brake Light-Tailgate Assist-Custom Home Made Hitch Cover INTERIOR: Shortened Shifter-Nismo Pedals-Dynamat Everywhere-Factory Cointray-Carbon Fiber Accents ROLLERS: Stock OR 17's With Nitto Terra Grapplers 295/70/17 ENGINE & PERFORMANCE: PRG Lift Kit-Nismo Billet Oil Cap-Platinum Terminals-Fram AirHog Filter-Slotted Cross Drilled Rotors I.C.E.: Eclipse AVN2454-JL Audio TR650 6 1/2 Coaxials-JL Audio TR650 6 1/2 Components-Hardwired Radar Detecter-Add On Remote Start-MICRO Alarm Other Rides: 05 Suzuki GSXR-03 Suzuki Quadracer LTZ-400
|
|
|
|
|
02-05-2007, 04:14 PM
|
#8 (permalink) | |
|
Registered User
iTrader: (3)
Join Date: Nov 2004
Location: Houston, TX
Posts: 5,291
Thanks: 4
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Quote:
|
|
|
|
|
|
02-05-2007, 04:45 PM
|
#9 (permalink) |
|
Registered User
iTrader: (-1)
Join Date: Feb 2004
Location: York PA
Posts: 1,820
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Is the GB for the gauge over? Where can I jump on at?
__________________
1BadTitan BASICS: Black LE KingCab 4x4-Off Road Pkg-Utility Track Bed-Big Tow Pkg EXTERIOR: 10,000K HID Headlight Conversion-AVS Bugflector II-Wade In Channel Rain Gaurds-Smoke Headlight Reflectors-Shaved Emblems-Painted Red Calipers-Smoke Taillights-Stainless Nerf Bars-Shorty Billet Antenna-20% Tint-5" Exhaust Tip-DIY Custom 3rd Brake Light-Tailgate Assist-Custom Home Made Hitch Cover INTERIOR: Shortened Shifter-Nismo Pedals-Dynamat Everywhere-Factory Cointray-Carbon Fiber Accents ROLLERS: Stock OR 17's With Nitto Terra Grapplers 295/70/17 ENGINE & PERFORMANCE: PRG Lift Kit-Nismo Billet Oil Cap-Platinum Terminals-Fram AirHog Filter-Slotted Cross Drilled Rotors I.C.E.: Eclipse AVN2454-JL Audio TR650 6 1/2 Coaxials-JL Audio TR650 6 1/2 Components-Hardwired Radar Detecter-Add On Remote Start-MICRO Alarm Other Rides: 05 Suzuki GSXR-03 Suzuki Quadracer LTZ-400
|
|
|
|
|
02-06-2007, 07:07 AM
|
#10 (permalink) | |
|
Registered User
iTrader: (3)
Join Date: Nov 2004
Location: Houston, TX
Posts: 5,291
Thanks: 4
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Quote:
|
|
|
|
|
|
02-06-2007, 08:06 AM
|
#11 (permalink) |
|
Registered User
iTrader: (-1)
Join Date: Feb 2004
Location: York PA
Posts: 1,820
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Blendmount install photos
Damn, that figures.
__________________
1BadTitan BASICS: Black LE KingCab 4x4-Off Road Pkg-Utility Track Bed-Big Tow Pkg EXTERIOR: 10,000K HID Headlight Conversion-AVS Bugflector II-Wade In Channel Rain Gaurds-Smoke Headlight Reflectors-Shaved Emblems-Painted Red Calipers-Smoke Taillights-Stainless Nerf Bars-Shorty Billet Antenna-20% Tint-5" Exhaust Tip-DIY Custom 3rd Brake Light-Tailgate Assist-Custom Home Made Hitch Cover INTERIOR: Shortened Shifter-Nismo Pedals-Dynamat Everywhere-Factory Cointray-Carbon Fiber Accents ROLLERS: Stock OR 17's With Nitto Terra Grapplers 295/70/17 ENGINE & PERFORMANCE: PRG Lift Kit-Nismo Billet Oil Cap-Platinum Terminals-Fram AirHog Filter-Slotted Cross Drilled Rotors I.C.E.: Eclipse AVN2454-JL Audio TR650 6 1/2 Coaxials-JL Audio TR650 6 1/2 Components-Hardwired Radar Detecter-Add On Remote Start-MICRO Alarm Other Rides: 05 Suzuki GSXR-03 Suzuki Quadracer LTZ-400
|
|
|
|
|
02-06-2007, 09:15 AM
|
#12 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Jan 2005
Location: Dayton, PA/Millersville, PA
Posts: 3,358
Thanks: 21
Thanked 9 Times in 7 Posts
|
Re: Blendmount install photos
What exactly does the scanguage do???
__________________
 The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government. - Thomas Jefferson 2005 Nissan Titan CC SE 4x4 6" Stage 1 Procomp Lift, SAW Coilovers, 35x12.50-17 Cooper Discoverer S/T's , 17x9" Xtreme Alloy 1079's, Lund Bug Shield, Autoventshade Vent Visors, Extang Tonneau Cover, Husky Liners, Custom Skid Plates, Bilstein 5125 Rear Shocks, Total Chaos Shackles, Splash Mod, Axle Vent Mod, N-Fab Steps, Tailgate Cargo Light Mod, Hella 500 Series Driving Lights, 3 of 'Em |
|
|
|
|
02-06-2007, 10:30 AM
|
#14 (permalink) |
|
Registered User
iTrader: (0)
Join Date: Jan 2005
Location: Dayton, PA/Millersville, PA
Posts: 3,358
Thanks: 21
Thanked 9 Times in 7 Posts
|
Re: Blendmount install photos
I did, just didn't realize that those were links at the bottom of it the first time. I get so used to seeing Signatures at the bottom, I pretty much ignore anything after the last complete sentece. Thanks.
__________________
The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in government. - Thomas Jefferson 2005 Nissan Titan CC SE 4x4 6" Stage 1 Procomp Lift, SAW Coilovers, 35x12.50-17 Cooper Discoverer S/T's , 17x9" Xtreme Alloy 1079's, Lund Bug Shield, Autoventshade Vent Visors, Extang Tonneau Cover, Husky Liners, Custom Skid Plates, Bilstein 5125 Rear Shocks, Total Chaos Shackles, Splash Mod, Axle Vent Mod, N-Fab Steps, Tailgate Cargo Light Mod, Hella 500 Series Driving Lights, 3 of 'Em |
|
|
|
|
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Linear Mode
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Photos of 05 aluminum diff cover install | gr8titan | Titan General Discussion | 74 | 06-05-2007 08:02 AM |
| Scan Guage/Blendmount install with photos | eat111 | Titan Interior Discussion | 13 | 01-09-2007 05:05 PM |
| Doctored photos? | mach1 | Titan General Discussion | 15 | 03-15-2006 08:21 AM |
| Photos of simple XM install | schneid | Titan Interior Discussion | 5 | 10-06-2004 01:38 PM |
All times are GMT -7. The time now is 01:20 AM.
 |
|
|