Where is a ignition-on 12v source under the hood?

[Titan Ken]

For installing an extra set of driving (fog) lights, I need an ignition-on 12 volt source under the hood for switching the driving light relay. In the small vehicle relay box I found a 10 amp fuse marked ignition, which I guess could be used. I'm wondering if there is another more convenient source somewhere, as I can't figure out how I would attach a wire to that ignition fuse.

Thanks, Ken

[bestatchess]

The manual (page LT-7) says that when the ignition is on or start, power is suppled through 10 amp fuse no. 59 in the fuse & relay box. There is a drawing on page LT-6 which shows fuse no. 59 as being the third one up in the row of fuses starting counting at the bottom right hand corner of the fuse & relay box.

So this is one that you are looking at, I assume (it doesn't show "ignition" marking in the manual).

So how about use that and something like this:

http://www.sportys.com/acb/showdetl....fromgoogle=yes

or cheaper at http://www.partsexpress.com/pe/showd...number=071-580

Is there enough clearance in the relay box for that?

[Titan Ken]

Yep, that looks like what I need. The one pictured though, looks like it's for the larger type fuse. The Titan uses those real little ones. I'll check around and see what I can find. Thanks for the idea.

Ken