|
Bulb Replacement
HEADLAMP (OUTER SIDE), FOR LOW BEAM
NOTE: Reach through wheel opening for access.
1. Turn headlamp switch OFF.
2. Disconnect the electrical connector.
3. Turn the bulb counterclockwise to remove it.
4. Installation is in the reverse order of removal.
HEADLAMP (INNER SIDE), FOR HIGH BEAM
1. Turn headlamp switch OFF.
2. Disconnect the electrical connector.
3. Turn the bulb counterclockwise to remove it.
4. Installation is in the reverse order of removal.
FRONT TURN SIGNAL/PARKING LAMP
NOTE: Reach through wheel opening for access.
1. Turn the bulb socket counterclockwise to unlock it.
2. Pull the bulb to remove it from the socket.
3. Installation is in the reverse order of removal.
FRONT SIDE MARKER LAMP
NOTE: Reach through wheel opening for access.
1. Turn the bulb socket counterclockwise to unlock it.
2. Pull the bulb to remove it from the socket.
3. Installation is in the reverse order of removal.
CAUTION:
After installing the bulb, be sure to install the bulb socket securely to ensure watertightness
Page LT-32 (LIGHTING SYSTEM)
__________________
Roy Rumaner
Fully Loaded 2004 Smoke LE 4x4
----------------------------------------------
Any questions about the site etc. Lets us know!
|