clock?

gummernaut · 01-06-2006, 06:09 PM

Anyone know how to set the time on the RF clock? I set it and it doesn't change. HELP!

**helomech** · 01-07-2006, 08:28 AM

On mine you just hold down on the hour button till it changes, and then same with the minutes.

TitanMatt · 01-07-2006, 09:36 AM

just hold down eith the M or H buttons on the right side of the stereo. I seem to lose 2-minutes a month so I know it works

pi3yeargrad · 01-07-2006, 11:45 AM

Quote:

Originally Posted by gummernaut

Anyone know how to set the time on the RF clock? I set it and it doesn't change. HELP!

I dunno if uve tried what these guys are saying but I had a problem once before with my RF HU and the time...have u been taking off ur face plate? sometimes the little harness connected to the faceplate will come loose just a tad from the bottom corner...if u have been...take it off again and make sure thats snuggly in place. Then try it again and it should work...that was my prob at least...

gummernaut · 01-07-2006, 01:38 PM

I've tried all that and it still doesn't keep time at all. As in not moving not just off a few minutes. thanks

pi3yeargrad · 01-07-2006, 02:33 PM

uve tried what I said? I remember when it happened to me it wouldnt change time I would set it and it would stay at the exact time I set it...until of course I did what I told u...if not

take off the faceplate....unplug the faceplate on right hand side...leave it like that and turn on the truck...dont crank just put on run...leave it like this for 1 min. Then reconnect and put the faceplate back on and try setting and see if it works...

gummernaut · 01-07-2006, 03:01 PM

I'll try that but I've never touched the faceplate. thanks