manual to power windows

20titan08 · 12-10-2007, 05:30 PM

well i have an 08 with manual windows. i have a friend in a shop who has converted manual to power windows on MANY old cars. he said it would be simple enough i could do it too. anyone had any experience with it. i know hes right because ive seen the cars hes done but i dont know the extent of the work. any ideas appreciated.
thanks, josh

loudtitan · 12-10-2007, 05:38 PM

i too am pondering this. i've ordered the power lock kit and will probably order the window kit in a couple of days.

**P's Titan** · 12-10-2007, 06:10 PM

check out this thread..

power windows

if nothing there for you search it, it has been discussed plenty and done before.

20titan08 · 12-11-2007, 06:39 PM

thanks P. that did it.

**P's Titan** · 12-11-2007, 06:42 PM

Quote:

Originally Posted by 20titan08

thanks P. that did it.

no problem

gabriel c. · 12-11-2007, 09:38 PM

i used a spal kit i bought on ebay for $35(no switches with the kit) and works awesome. power windows and locks. its easy to do its just the running of the wires that takes the most time. it took me about six or seven hours total but the end result was well worth it and i had to also wire the door locks to the alarm for keyless entrance. take your time and run all your wiring first it will make it easier.

bigfinderman · 12-12-2007, 09:11 AM

I to am planning on doing this.. Ive called a few shops, including the dealer, and they said it would not be worth the money that it would cost.. But after reading this, im gonna do it myself.. Im pretty mechanically inclined and have always done most of the mods and repairs to my own vehicles.. It would be nice to a full write up on this!!

gabriel c. · 12-12-2007, 07:07 PM

Quote:

Originally Posted by bigfinderman

I to am planning on doing this.. Ive called a few shops, including the dealer, and they said it would not be worth the money that it would cost.. But after reading this, im gonna do it myself.. Im pretty mechanically inclined and have always done most of the mods and repairs to my own vehicles.. It would be nice to a full write up on this!!

dealer wants to put in oem equipment. not after market.oem is too expensive and more of a pain to install.

gabriel c. · 12-12-2007, 07:10 PM

this is the original thread i used as motivation to do the mod.

Universal Power Windows?

gabriel c. · 12-12-2007, 07:15 PM

this is the same kit im using.

Universal Power Windows?

same kit with switches:

http://cgi.ebay.com/ebaymotors/SPAL-...QQcmdZViewItem

bigfinderman · 12-13-2007, 06:57 AM

Sweeeet! Thanks for the info bro

.. Can't wait to get me some power in my beast...

bigfinderman · 12-19-2007, 12:49 PM

Has anyone used factory switches with this mod?? I think it would look cleaner if you could use them..

ajbozz · 12-26-2007, 05:10 AM

I put in the power locks and windows over the holiday weekend. The only thing I didn't do yet is tap in to power. Any suggestions for Ignition source power for the power windows?

gabriel c. · 12-26-2007, 08:37 PM

i used the red acc. wire at the ignition switch.

30 on the relay goes to the battery 12 volt constant( 25 amp fused)
85 is ground
86 goes to the red wire on the ignition switch
87 goes to the window switches( 25 amp fused)

nyc07_king.titan · 12-27-2007, 06:48 AM

i too bought a xe with nothing on it. i went with spal power window kit. get the switch kit from them its perfect. i also got the lock kit but had problems with the cable splice( no good ) i bought the oem power door lock motors...works perfect supppppper easy install swaps out the door lock and out the new powered in done with some wiring and works perfect. dont get the cable splice kit its not worth the trouble...i got locked out a few times...i would lock other times....get the oem locks from a le or se....plus you loose a key hole on the passenger side...better a+++