Blue Dash Lights, LED

[monstertitan]

Thanks guys, I appreciate the comments!!!

[Truck Stuff]

is it hard to upload pics on to the AVIC-D3, i just put one in my car and haven't really looked into it.

[magavin]

where did u get the LED's for your dash?

[jpourciau]

Originally Posted by Truck Stuff

is it hard to upload pics on to the AVIC-D3, i just put one in my car and haven't really looked into it.

Hey, I been thinking about getting one of these. Do you have a picture of this in the titan?

[SD_Titan]

Originally Posted by monstertitan

Im trying to come up with a write up as we speak, I knew that question was coming. I tried to take pics as I swapped them out, but sometimes I got ahead of myself and would forget to take pictures.

I work in the electronic field and have some experience with soldering, but this was done in pretty much one night. I am really happy with the results, including the odometer being blue also.

thanks for the replies!

What size Solder was used?

[Truck Stuff]

jpourciau,

sorry man I dont have a Titan, I have a STi, but i get some pics for you anyway.

[Floyds_racing]

VERY NICE I want red!

[NothingSpecial]

Great job! I'll have to look into teaching myself how to solder so I can do this

[monstertitan]

Originally Posted by Truck Stuff

is it hard to upload pics on to the AVIC-D3, i just put one in my car and haven't really looked into it.

No, its pretty easy actually. You just burn your jpegs to a folder on a disc, navigate to your setting on the receiver and apply as wallpaper. They do have to be .jpg files though.

I dont know the size of the solder but it was pretty small, you really dont need very much solder though. I hardly used any when installing the new led's.

As for where to get the led's if you check out the tutorial i made you will find a link there. I bought them on ebay and came from Hong Kong. They have red, yellow, blue, green.

The solder iron I used had a variable temp setting on it, if the tip is to hot it can damage the circuit board.

[S.TX_Titan]

Originally Posted by monstertitan

No, its pretty easy actually. You just burn your jpegs to a folder on a disc, navigate to your setting on the receiver and apply as wallpaper. They do have to be .jpg files though.

I dont know the size of the solder but it was pretty small, you really dont need very much solder though. I hardly used any when installing the new led's.

As for where to get the led's if you check out the tutorial i made you will find a link there. I bought them on ebay and came from Hong Kong. They have red, yellow, blue, green.

The solder iron I used had a variable temp setting on it, if the tip is to hot it can damage the circuit board.

that is one sweet looking mod, damn if i had more time

[redondotitan07]

i want to put the blue leds in my truck how do i do that

[redondotitan07]

can some one help

[redondotitan07]

can u tell me how to do that for my truck

[Cmando4Life]

dude.. shut up there are clearly details on this site exactly how to do it. look into it before impatiently asking a million times.

[TitanMadness808]

LOL... I think he got the picture he stopped asking 2/17/08.

Just ordered my LEDs yesterday. I have a gas saver, which is my daily driver now so I can afford to have my truck be down for a few days.