Bike carrier for Nissan Titan

titangold · 04-07-2005, 04:17 PM

Found this great bicycle mounting system for the Titan utility trac made by Renniks.

link is:
https://host195.ipowerweb.com/~biketote/catalog/index.php?cPath=34&osCsid=a28b6b614b730be0a0c4bb45 296f75d7

here's my two bike setup:

scottsbro23 · 04-08-2005, 05:15 AM

Hey look this one is free!!!!!
well if you allready have the top tube and fork mounts...

Gig'em · 04-08-2005, 07:02 AM

Thats cool. Good find. How much was it? Your link isn't working for me. Will it mount to the side rails?

I use the simple setup that someone else posted on this site.

Utilitrack Yakima bicycle mount

BigBlackTruck · 04-08-2005, 07:58 AM

Here is a pick of the fork anchors I got off overstock.com for mine. They are 2 for 24 bucks, seems like a good bargain the others I have found are about $20 a piece I hope they are of ok quality. I am hoping I can take out the knob in the middle and that the hole in the center will be big enough to put the bolt of one of the small anchors through, and just attach it with one of those to the track in the floor of the bed. I will try to post pics when I get them on tuesday or wed.

ColoTitan · 04-11-2005, 03:38 PM

Quote:

Originally Posted by BigBlackTruck

Here is a pick of the fork anchors I got off overstock.com for mine. They are 2 for 24 bucks, seems like a good bargain the others I have found are about $20 a piece I hope they are of ok quality. I am hoping I can take out the knob in the middle and that the hole in the center will be big enough to put the bolt of one of the small anchors through, and just attach it with one of those to the track in the floor of the bed. I will try to post pics when I get them on tuesday or wed.

Looks like a good deal, keep us updated.

BigBlackTruck · 04-23-2005, 07:29 AM

Sorry it took so long but here are some pics of the bike holders I used. I ended up only using the part that goes in the utilitrack from one of the small cleats and put a bolt( found at home depot, its a metric thread) and washer through the top and threaded into the bottom part of that cleat.

CharlienoX · 04-23-2005, 08:45 AM

I went somewhat low-tech and used a 2x8 with 2 fork mounts and 2 yakima wheel mounts bolted to it...it's not totally secure, but a theif would have to take the whole shooting match to get the bikes (and that would take a lot of time/my guess is they would move to an easier target with less risk).