Installed Sylvania SilverStars detail pictures!!

*Titan_TX* · 11-19-2004, 10:35 PM

Well guys, I am surprised in the difference between the stock bulbs and these silverstars. There is definitely a improvement in light output. You can see for yourselves in the pictures.

First four pictures are the stock bulbs. 5th one is the silverstar.

*Titan_TX* · 11-19-2004, 10:36 PM

part 2 With SilverSTars

1st one silverstars installed, 2nd one left silver star and 3rd same. 4th picture right headlight has silverstar (driver side), and last picture has both silverstars installed.

*Titan_TX* · 11-19-2004, 10:37 PM

The final complete set. The last one has the high beam on to show the difference in yellow with the new silverstar.

Titan Kid · 11-19-2004, 11:07 PM

very nice...mine are being shipped right now..how long did the install take you?

*Titan_TX* · 11-19-2004, 11:20 PM

Quote:

Originally Posted by Titan Kid

very nice...mine are being shipped right now..how long did the install take you?

2 minutes a side. Phillips #2 screwdriver, and turning the wheel all the way to the right for the driver side and just the oposite for the passenger. Access through the wheel well. One screw remove, pull liner back, reach up, and pull out.

mytitan · 11-20-2004, 01:17 AM

do u have the part #'s...

scottryla · 11-20-2004, 06:17 AM

I just put my in yesterday, I did the lows and the fog lights. I have used Silver Stars in my last 3 cars and they are a great product.

low beams = 9006 ST
fog ligts = 893ST
high beams = 9005 (maybe ST I do not know)

Make sure you order them off of Ebay, I saved like $30.

Chris M. · 11-20-2004, 07:45 AM

Thanks for the info. I was about to buy driving lights but I did not want to ruin the look of the front end with the cheap stuff. These lights should do the trick at night.

honeykeeper · 11-20-2004, 12:25 PM

I just installed the 9006 ST/2 pack for the low beams...definately white lines are crisper on the road now.....a good improvement...haven't done the highs or fogs yet..not impressed with the stock fogs....in the fog that is!!!
Just remember to never touch the bulb....or it's toast!!

honeykeeper · 11-20-2004, 12:28 PM

by the way....mine are 4,000 kelvin...anyone found them in 41-43K?????????

rawze · 11-20-2004, 12:46 PM

wow that looks good-guess i'll have to do that

aznsupra · 11-20-2004, 01:38 PM

because of this thread, i stopped by walmart today and picked up a set lol. cant wait til night time to see what they look like.

cardesigner · 11-20-2004, 07:02 PM

I just installed mine. Worth the $30!

schneid · 11-20-2004, 08:44 PM

Bought all from eBay motors from separate sellers. 9006ST's, 9005ST's, and 893ST's. Install is easier than I thought. Just undo the phillips screw on the wheel well. Gives enough access to change them. Light is brighter and whiter. Haven't had them on the road yet.

SmokenTitan · 11-21-2004, 08:31 AM

http://www.nam.lighting.philips.com/...stalvision.php

Has anyone tried these?

I had some phillips bulbs in my RSX, at the time they didnt have H1 Silverstars, and I loved them. My G.F. had silverstars in her car and mine looked much better, but her car at the time was an older civic, so that could have been it too...