Help with bolt pattern

PENROSE · 08-22-2005, 10:49 PM

Looking at some wheels on Ebay and some of the ones I am interested in say that they are 6x5.5 and will fit Chevy Tahoe, Yukons etc. They go on to say that they will fit most or all 6x5.5 lug patterns.

Will they fit a Titan?

Austin · 08-23-2005, 12:31 AM

If they're aftermarket wheels, they're likely to be made with a larger centerbore than either a Titan or a Tahoe. It means they're lugcentric, and yes, they'll fit your titan. Just make sure you torque the lugnuts down before you set the tire on the ground.

If after installing these wheels, you have a vibration which isn't due to wheel balancing, then look into hubcentric rings for the wheels.

If they're OEM Chevy wheels, whether they fit or not will depend on if Chevy's hub diameter is larger or smaller than the Titan's hub diameter. If the Chevy diameter is larger, then they'll fit on a Titan.

beeboyee · 08-23-2005, 01:35 AM

also check the offset of the wheel
i heard titans have weird wheel offsets
compared to those "american trucks"

rays05titanse · 08-23-2005, 06:24 AM

FWIW, I traded my '01 Chevy Tahoe for my '05 Titan and swapped the 22s from the Tahoe onto the Titan. Fit perfect and backspacing was perfect. Bolt pattern should be 6 x 139. Of course, backspacing is different on different kinds of wheels. Be careful about this and good luck.

PENROSE · 08-23-2005, 09:48 PM

Thanks for the info. I think the offset was +15mm?? 20x8.5 wheel