Fog lights

[GreenT]

55W fogs will work fine with the stock harnesses. Anything higher and I would upgrade the harness. The ones in my sig pic are 55W APC fogs ran through the stock harness and with a stock fog light stalk. They worked fine. Although I uninstalled them because they filled up with water. Had them installed for over a month though and used them every night with no damage to the harnesses. As of right now I am trying to find a higher quality 55W 4" fog or driving light that doesn't cost a fortune.

[MENMYJP]

Originally Posted by hondarider227

menmy I will put some pics up didnt have to drill through fire wall used a hole that has i belive the emergency brake cable going through it. It comes out right below the master cyln. To mount them I used a drill bit with an angle adaptor on it. (not sure of the correct name of it. The Piaa light harness is long enough so you dont have to add any wire. The last thing I did do was add what they call add a fuse I belive. I went off of my ignition fuse in the fuse panel under the hood passanger side fuse panel. It allows two fuses in the same fuse holder with a hot lead off of it. 7 bucks at pepboys. Came out clean. I belive About an hour and a half of work. I think it took me longer to adjust my lights to where I wanted the to shine

Looking forward to seeing those pics... Whenever you get a chance, I am still in limbo on the 510's or the stocks. THANKS-

[hondarider227]

Have added photos to my photo Gallery

[GSonnen]

Originally Posted by hondarider227

Just put piaa I belive 510 in my titan nice light easy install. they fit nice and with the cage style black cover they look good

hondarider227:

I'm considering the PIAA 510's for my Titan. Did you have to alter/cut/drill the mounting brackets much?

BTW: those lights look great on your truck!.