Billet Grille Install Instructions?

3Riverssouth · 08-16-2006, 05:16 PM

Does anyone have good instructions or know where I can get good instructions for installing a billet grille? I bought a grille off of ebay following a link someone posted. Like the grille a lot but the instructions seem to be lacking and I dont want to wag this.

Thanks in advance for any help.

baseballfanz · 08-16-2006, 09:07 PM

It all depend on the kind of grill you got. There are bolt over and there are some that require the honeycomb grill to be cut out. Don't know if this is the same type you got but mine is a bolt over.
First picture is the grill install, second is the clip behind the grill (alos the same way for the 2 outside grill) and third picture is the clip for the lower grill.

3Riverssouth · 08-17-2006, 07:23 AM

Thanks the pics help a lot. Looks like the exact same grille I got.

jaho1979 · 08-17-2006, 08:37 AM

That's what mine was like too. I removed the entire grill assembly, since I couldn't get my big hands behind it. That was the most time consuming part of the project. Once you get that off, bolting it up is a cinch. Just take your time and don't get frustrated. I bought some of those locking nuts with the plastic ring built in, cause I didn't want it coming loose, and I definintely didn't want to take the grill off again! Here is a picture of mine installed, my bars are closer together and there are more of them, but same basic setup. I don't have any installation pictures, just this one...

3Riverssouth · 08-18-2006, 02:45 PM

Thanks for all the pics and advice. Got this installed earlier will have to put up some pics. I did just take everything apart made things much easier.

Justintoxicated · 08-18-2006, 03:22 PM

a nice set of ratcheting wrenches from costco would have saved me over an hour of work when I installed mine!

baseballfanz · 08-18-2006, 04:05 PM

Quote:

Originally Posted by Justintoxicated

a nice set of ratcheting wrenches from costco would have saved me over an hour of work when I installed mine!

No kidding, I got blister on my hand from using a pair of plier, I had the tools at home just didn't want to wait till I got home. I had it shipped to my work and wanted it on ASAP.

gilligan · 08-18-2006, 07:23 PM

just curious who did you buy them from and what did they cost?

And most importantly would you buy from them again?

3Riverssouth · 08-19-2006, 06:51 AM

I got my from EBay.

Search for GoodyOnBay or 04 05 06 Nissan Titan/Armada Billet Grille Upper+Bumper.

I would post the URL but since I have not made enough post as of yet it will not let me.

The price was 115.00 plus 2.50 for insurance.

I would by there again. Only thing I did was go and buy some lock nuts and better washers for the bolts, think it cost me 2.00 for that.