On 5/24/06 I purchased a zoomers catback exhaust because everyone on this site raves about them. Today I discovered that the rear most hanger is completely detached leaving just a hole. Imagine my delight. Anyone else have any issues with this? I don't beat my truck in the slightest. The most offroading it sees is an occasional dirt road....
cheap weld there, i would send a pic to them and see what they would do for you
__________________
2008 SE CC 4X4 RED BRAWN w/popular package, Big tow, Bed utility w/bed extender, Fog lights and back up sensors, Homelink
MODS:
Sirius
TomTom GPS
DIY Intake Mod w/Amsoil EAa104 filter
Activetune Grounding Kit Red wires
Magnaflow Cat-Back
Silverstars
Luminics Pure Blue 6000k fog lights bulbs
Nissan Steprails
2* Timing
Nissan Bug Shield
OEM Weather Floor mats
Armada Airdam mod
I did all this without wife knowing
That is the saddest excuse for a weld i have seen in a while....I would let them know and send a pic with it...I was a welder for 5 yrs. before i got into construction and that is sad...
On 5/24/06 I purchased a zoomers catback exhaust because everyone on this site raves about them. Today I discovered that the rear most hanger is completely detached leaving just a hole. Imagine my delight. Anyone else have any issues with this? I don't beat my truck in the slightest. The most offroading it sees is an occasional dirt road....
IM NOT SURE THAT IS JUST THE WELD BECOUSE THE HOLE PROVES THE PORTION OF THE PIPE TORE OUT. THIS MAY SOUND DUMB, BUT HOW DO U LIKE EVERYTHING ELSE??
IM NOT SURE THAT IS JUST THE WELD BECOUSE THE HOLE PROVES THE PORTION OF THE PIPE TORE OUT. THIS MAY SOUND DUMB, BUT HOW DO U LIKE EVERYTHING ELSE??
There was plenty of room to put a good bead of weld on both sides of the brace..All i see is about 1/2 inch on both sides when it could have been a good inch+ on both sides...Bad welding job.....
Well, I'm certainly glad I got the Volant. I think I remember someone raving about the Zoomers saying you get what you pay for...I guess the $700 wasn't enough!! lol..
That sucks. Hopefully they will replace it free of charge.
Well, I'm certainly glad I got the Volant. I think I remember someone raving about the Zoomers saying you get what you pay for...I guess the $700 wasn't enough!! lol..
That sucks. Hopefully they will replace it free of charge.
Well, I'm certainly glad I got the Volant. I think I remember someone raving about the Zoomers saying you get what you pay for...I guess the $700 wasn't enough!! lol..
That sucks. Hopefully they will replace it free of charge.
Can we get this back on topic I really hate advertising for someone else! Just a reminder you get what you pay for...
I'm hoping this is just an isolated event, because I know several people have the Zoomers exhaust, and I hope they don't experience this problem either. Hopefully your vendor and/or Zoomers will take care of you and get everything fixed for you.
On 5/24/06 I purchased a zoomers catback exhaust because everyone on this site raves about them. Today I discovered that the rear most hanger is completely detached leaving just a hole. Imagine my delight. Anyone else have any issues with this? I don't beat my truck in the slightest. The most offroading it sees is an occasional dirt road....
Another thought...Could have been an angry/jealous Hemi owner that stepped on your exhaust tip???
I do agree, though, that it was a very crappy weld. Seems like Zoomers should have welded it better. Here is one of the welds on my new Volant exhaust system. Seems to be a little more robust, and more of the hanger was actually welded to the piping.
Zoomer's actually did the install? If not, then I don't see how any this would be Zoomer's fault. I've had their cat back now for over a year, with no issues at all. I took the exhaust to an exhaust shop, and it took 25 minutes at the most to put it on my truck. No welding issues here. That's just a smacktard welding job.
Zoomer's actually did the install? If not, then I don't see how any this would be Zoomer's fault. I've had their cat back now for over a year, with no issues at all. I took the exhaust to an exhaust shop, and it took 25 minutes at the most to put it on my truck. No welding issues here. That's just a smacktard welding job.
The Zoomers comes welded. It's a direct bolt-on exhaust system. That is why it is Zoomers fault, because they did a crappy weld-job from the factory.
Look at how thin the wall of the piping is. Looks a little thin there. So thin it couldn't hold up to the twisting and bending your exhaust takes. Looks like you are paying for the name not the product.
__________________
2007 White with Charcoal SE CC 4x4 with off road, tow, SE popular with bench, and utility with bed extender
Mods to date:
6" Procomp Stage II lift, CST Sway bar endlinks, 35x12.5x17 Procomp Mud terrains, 17x8 Moto Metal 954s, Smittybuilt stainless nerf bars, Chrome mirror caps, Color matched Bushwackers, Leer 700 Toneau cover, T Rex 1pc grille, Custom FlowMaster DeltaFlow 50 series dual in single out muffler, Injen powerflow intake, JVC Kw-avx800 7" in dash dvd, 7" DEI wide screen headrest monitors, Sony Xplod 2x250 amp, Infinity Reference 6 1/2" in rear and 6"x9" in front, Prodigy brake controller, Ventshade door sill protectors