Glass fenders installed....

Yellomantis · 01-20-2007, 02:11 PM

Thanks again Jason27 for the install.

*VTECLESS* · 01-20-2007, 02:16 PM

I just had mine painted for Christmas. If you don't get a custom liner made, spray paint above the fender liner black. It makes it look pretty clean. I used engine block paint to help with the heat. Nice install

Yellomantis · 01-20-2007, 02:20 PM

Quote:

Originally Posted by VTECLESS

I just had mine painted for Christmas. If you don't get a custom liner made, spray paint above the fender liner black. It makes it look pretty clean. I used engine block paint to help with the heat. Nice install

Never thought of it. I am planning on replacing these within the next year or so. The black paint is a good idea though. I might just do that for now. I will most likely rattle can them to match the red as best I can. They are going to get beat up and scratched, so I'm not too concerned with the finish.

d0va · 01-20-2007, 02:56 PM

those thing are wide yellomantis. they are going to look nice with the rest of your set up!!!! ...

i<3mytitan · 01-20-2007, 04:01 PM

looks good....can't wait to see the LT kit on there

bmx_titan · 01-20-2007, 05:31 PM

are those the glass works fenders?

Yellomantis · 01-20-2007, 06:32 PM

They are Hanneman.

AgTitan06 · 01-20-2007, 06:38 PM

Any reason you didn't get them painted before you installed them?

Yellomantis · 01-20-2007, 07:24 PM

Needed to make sure they fit first. I wanted to do all the test fitting and drilling before paint.

bmx_titan · 01-21-2007, 01:44 PM

do the glass works flare out as much as those? are they pretty similar?

bigblue35 · 01-21-2007, 03:22 PM

how are was the install on the Hanneman's? looks like they lined up pretty good. i tried helping a buddy of mine to install his glassworks fenders on his f-250 and it was a nightmare. those things would not line up for anything and then when we drilled them and tighting down the nuts they were cracking. and on some of the corners there wasnt enough fiberglass so it was real weak and the one corner had a hole in it and stuff. it was just a mess and they are still sittin in his garage.

Yellomantis · 01-21-2007, 04:27 PM

The glassworks are a 3" rise and a 3" flare. the hannemans are a 3" rise with a 4" flare. I got these from another member here and the price was right. I will be hammering the $hit out of these while doing some suspension testing so I will be replacing them with some glassworks once these self destruct.

The instsll went smooth, seeing as how Jason had all the holes already pre drilled. The fenders don't really line up that well. But they will serve their purpose.

Chris93Si · 01-23-2007, 03:26 PM

Looking good, will look even better when the LT is in place

Aquaholic · 01-29-2007, 08:41 AM

Sweet casey. I know you said you were going to buy them but I didn't know you already had them. Looks good. You have my gears turning in my head now.

**Blackbeauty** · 01-29-2007, 08:46 AM

Any plans for the front bumper? It's pretty noticable now that the bumper isn't as wide as the fender lip in the front. Nice look, though!