How to build the CC bed extender

[gksmith]

I purchased a sliding bed extender for a CC that didn't have build instructions. The parts were labelled but I figured out that two pieces were mislabelled.

Does anyone have instructions on how to build the CC version? What I have doesn't look like what Nissan shows for the bed extender (all the rails are the same length). I have a shorter top rail.

What I also have is a bunch of screws and plastic fixtures and the utili-track hardware and no clear idea of what to do with them.

[CBURNS1101]

Originally Posted by gksmith

I purchased a sliding bed extender for a CC that didn't have build instructions. The parts were labelled but I figured out that two pieces were mislabelled.

Does anyone have instructions on how to build the CC version? What I have doesn't look like what Nissan shows for the bed extender (all the rails are the same length). I have a shorter top rail.

What I also have is a bunch of screws and plastic fixtures and the utili-track hardware and no clear idea of what to do with them.

I might have my instructions at home I'll let you know

[gksmith]

This would probably make a good sticky if we can get the offical Nissan version.

Based on the stamp on one of the plastic pieces, I identified AMP Research as the maker and found these instructions - http://www.amp-research.com/pdflibra...BedXTender.pdf

They are a little generic - more for the non-slider versions.

[nyc07_king.titan]

if you look at your factory bed extender. its made by!!!!!!!!! AMP RESEARCH!!!!!!!!! even my factory 07 bed extender. so the instructions are what you need. good luck..helped me shorten mine so it doesnt rub my bed cover rails