PRG Shackles - PRICE REDUCED!

[Blackbeauty]

Come one! Come all! Some of you may know that I was trying to put a deal together with Greg from PRG Products for a reduced price on a large quantity of shackles. Well, the details just got a LOT simpler!

The price on the shackles has been reduced to $119 SHIPPED for a limited time. The lower price will run until April 30th, 2008. Get them while they last!!!

http://www.prgproducts.com/shop/prod...itan_shackles/

Here is a comparison photo of the stock vs. PRG shackles...



You can see how much better built the PRG ones are... They will prevent this from happening:



Now these will fit BOTH 4x4 and 4x2 Titans. Note there are three installation heights, 0", 1/2" and 1" drop. These can be used to level the Titan without lifting the front of the truck. Or you can just replace the stock units with no change in ride height.

Here’s the installation thread with pictures… It’s not difficult and can be done with only basic handtools.

http://www.titantalk.com/forums/tita...hackle+install

To order, just click on the "ADD TO CART" button on the PRG website, and fill in the information.

For all those who have been contacted and were anticipating this, thanks for your patience. Anyone who wants to have the shackles shipped to me for delivery to the NC meet in June, Greg has my name and address and just tell him you want them shipped to me. I will contact you when they arrive and will bring them with me to NC.

Thanks Greg, and to all who have expressed interest in this great product!

[Juday]

Thank you Greg, and thank you BB for your help in this great deal. I know I'll be purchasing mine here shortly.

[joeinstl]

"These can be used to level the Titan without lifting the front of the truck. Or you can just replace the stock units with no change in ride height."

I heard that these would not be enough to level the truck. It will lower the rear an inch, but it won't level the truck. You have to lift the front in order to level the truck.

[bbomar]

Ordered mine this Morning!!

Thanks!!!

[bbomar]

Originally Posted by joeinstl

"These can be used to level the Titan without lifting the front of the truck. Or you can just replace the stock units with no change in ride height."

I heard that these would not be enough to level the truck. It will lower the rear an inch, but it won't level the truck. You have to lift the front in order to level the truck.

Actually a member here used them, and it lowered his close to an inch and 3/4 !!!!

[Brianguy]

I was considering buying these but with this discount I'm ordering them now

[Juday]

Well, I just got off the phone with Jen. My order is placed.

[RB's Titan]

just ordered mine via paypal on website

[P's Titan]

i may have to go see greg and get these put on!

Thanks BB and PRG!!

[CHUD]

Originally Posted by joeinstl

"These can be used to level the Titan without lifting the front of the truck. Or you can just replace the stock units with no change in ride height."

I heard that these would not be enough to level the truck. It will lower the rear an inch, but it won't level the truck. You have to lift the front in order to level the truck.

With pre-08s that's true. But the '08s are an inch to inch and a half higher in the front. I'm pretty sure these shackles would level an '08.

[konigfritz]

woo hoo, just ordered mine!

Thanks BB and Greg!

[hooligan]

bump for kickaass shackles! good post blackbootie!

[Titan1080]

Ordered....thanks Greg and BB!!

[hooligan]

order em up while supplies last!!! after that, there will be a wait till more come back from powdercoating!!!

[Blackbeauty]

Guys! Talked to Greg! The pallet of shackles is going fast! Jump on this while it lasts! You can order online or just call Greg/Jen and order! Easy as that!