Aries Off-Road Bars

KneeSahnTight'un · 05-03-2008, 06:14 PM

Anyone that has installed these? How hard is it and what all tools are required?

Thanks in advance!!

SOCALTITANKC4X4LE · 05-03-2008, 08:06 PM

If you are taling about the Aries Bull Bar, you just need a socket and wrench to remove the tow hooks and then you line up the holes on the Bull bar with the Tow hook mounting holes and using the supplied nuts and bolts that came with the Bull bar.The hardest part is getting the Tow hook bolts loose. I suggest you spray them with PB Blaster or WD 40 and let it soak for about 20 minutes.

KneeSahnTight'un · 05-03-2008, 08:10 PM

Oh, I should have been more specific. They are the step bars.

**Blackbeauty** · 05-04-2008, 06:43 AM

Holy cow! The step bars? Those are like the easiest thing you can install. They come supplied with the bolts, and the holes are already in your truck frame. I believe you need to remove one hole plug or something, but other than that, just line them up with the holes, insert the bolts, Titan (

) them and you're done! Very easy installation, and all you need is a socket wrench and some sockets. Good luck and have fun with it!