Hey Guys -
Just found a place that has built some parts that should allow us to buy a part that bolts on and provide access to the fuel in the fuel rail. This is a big time saver when hooking up a pressure guage and or running Nitrous....Swooooosh.
I'll be driving over to purchase and check to make sure that this is the real deal.
Here is the company that is providing the service as well as other parts for those Nissan products.
__________________
Randy IRCCREW CHIEF - International Racing Club VK56
'04 CC LE White Born on date 01/04, Tundra convert
Too many mods to list PM me I'll tell ya.
Re: Fuel Adapter...Hook up Nitrous & Pressure gauge
Man I thought you might try and pull a stunt like that even after I "PAID" credit to you.....SOOOOOoooo Check is in the mail and at .008cents per reply as per our agreement you are not going to be millionaire anytime soon...LOL
Oh and just incase you try to sue me for breach of Special Ops rules....FORGET AbOUt it... that picture is mine now...I added artist impression...the big "0".....LOL
Last edited by RB's Titan : 05-15-2006 at 05:41 PM.
Re: Fuel Adapter...Hook up Nitrous & Pressure gauge
a measly 75 shot won't hurt anything :P but would surely get you prob atleast a full second faster in the 1/4 :P the head went from 14.6 to a 13.7 using a 50 shot i believe
__________________
05' Blizzard White 4X2 KC SE
Foose Speedster 6 22's /w Nitto 420-S 305-40R-22, Hoosier Pro 28x11.50x16 Slicks, McGaughy 2/3" drop kit, Jim wolf Technologies Camshafts, IPT 3400 RPM TQ converter, IPT Valvebody, IPT Built Tranny, AEM Bruteforce CAI, NX Express Import WET kit 125 shot, Stillen Longtube headers, Dynatech 2.5" Powercats, JBA Evol catback, Detroit TruTrac LSD, Flex-A-Lite electric fan conversion kit #295, AirRaid Throttle body spacer, TB Coolant By-pass mod, Line-x spray in bedliner, Trenz 3 Piece framed perimeter billet grille /w matching bumper billet insert, Chrome tailgate cover /w handle, MCulloch HID 6K lows and fogs, Altezza Chrome taillights
BEST 1/4 Times
12.929 @ 103.28 NA FMP 7/18/08
12.8591 @ 106.74 (125 shot) 3/2/08 FMP Before IPT tranny
Re: Fuel Adapter...Hook up Nitrous & Pressure gauge
Quote:
Originally Posted by Toomnymods
a measly 75 shot won't hurt anything :P but would surely get you prob atleast a full second faster in the 1/4 :P the head went from 14.6 to a 13.7 using a 50 shot i believe
Tommy you running Gas yet?...I'm following the lead...aka the Head.
I bought the Heads fuel line adapter. I will need it for testing at first since after buying the piece listed here plus the modded fuel line I can run gas on one and gauge on two.
Re: Fuel Adapter...Hook up Nitrous & Pressure gauge
so what do we gotta do to add some spray in our trucks? also, would we use wet or dry? any kits made special for the titan or any would do? any reccomendations?
Re: Fuel Adapter...Hook up Nitrous & Pressure gauge
Quote:
Originally Posted by pi3yeargrad
so what do we gotta do to add some spray in our trucks? also, would we use wet or dry? any kits made special for the titan or any would do? any reccomendations?
Second you need a dry/wet kit and a fuel rail adapter as mentioned above if goin wet.
Third you need to pull your stock plugs and go with the Denso or NGK iridium plug 1 step cooler. You can get these at Sparkplugs.com
Fourth it's a good idea to get a A/F Gauge. Dyno tune has one for $279.
Fifth buy the Cipher software so that you can retard timing (-2) if needed and so you can data log your runs.
Sixth have fun doing the install and or pay someone to do it...around $300. The installation is not hard to do just a little time consuming because theres things to think about liek where does the line run, where does the bottle go, do you want to hide it etc.
As you might can tell I have been thinking about this mod for a while and I soon will have all my parts just gotta get it'R done.