Can we make a sticky of who can give 2 degree timing advances?? - Page 3

EE_TITAN · 07-11-2007, 08:39 PM

Ok, I can do the advance in Tucson, AZ area. $20 sounds fair. Email @ cclindsey@gmail.com

Toomnymods · 07-11-2007, 10:53 PM

Quote:

Originally Posted by slowredz

Toomanymods did mine for $20 yesterday. I think thats a very fair price considering him going out of his way to do it and the cost of the stuff. If you are

over $20 maybe you should sell your truck and buy a Kia

how you liking the advance?? your truck is still in break in period should really start to feel it around 4500 miles.. make sure you throw in some synthetic for her :P

Titan-man · 07-12-2007, 02:14 AM

I got mine done at a dealer over here $85.00. Didn't care how much it costed at that time just wanted it done and cost didn't matter. Other people payed about the same back then. No one at that time have even the software to do it but them. Now there is 2 maybe 3 that have it. I don't do it for the money just need to eat. LOL I work 2 jobs just to support my Titan habbit. Still have no regrets about paying that much yo get it done. Still looking at other mods with no end in site (hopefully), I maybe broke but hope to have a quick truck...

slowredz · 07-12-2007, 07:34 AM

Quote:

Originally Posted by Toomnymods

how you liking the advance?? your truck is still in break in period should really start to feel it around 4500 miles.. make sure you throw in some synthetic for her :P

Its good I can definately feel the difference, thanks again

DawgBone · 07-12-2007, 08:15 AM

1)Toomnymods, Texas - can give 2 degree timing advances in Dallas/FtWorth metroplex area for $20.00 if you come to me, and 45.00 if I have to drive to you.
2)Titan-Man, Honolulu Hawaii - I usualy charge 25.00
3)SmokedTiresITAN, Phoenix/Mesa, AZ - I charge $20 480.221.6543
4)DawgBone, N.E. Atlanta - No charge, but donations are much appreciated (hint, hint). Available Mon-Fri.
5)TitanBlue, Annapolis, MD
6)KingMade, South Atlanta - $Little bit of his favorite beverage
7)Cardman, Meridian, MS - $Little bit of company LOL
8)sudden urge, Chicago, IL - $25
9)dawgs77, Modesto, CA
10)EE Titan, Tucson, AZ - $20

EPXE06 · 07-12-2007, 09:03 AM

anybody in the San Diego area ??

TitanLou · 07-12-2007, 12:55 PM

Talked to Melloy Nissan here in Albuquerque. They wil do it for $85.00. They also said that I would need to run super unleaded in it or the engine would ping. Anybody know if this is true or not.

DawgBone · 07-12-2007, 01:01 PM

Quote:

Originally Posted by TitanLou

Talked to Melloy Nissan here in Albuquerque. They wil do it for $85.00. They also said that I would need to run super unleaded in it or the engine would ping. Anybody know if this is true or not.

That's bs. I ran 87 and 89 octane all day long with no problems. My truck personally ran best on 89 (prior to Osiris)

hobbsy · 07-12-2007, 03:11 PM

went to my dealer today. he said he would do it for free!!!! ........but then as he was checking the timing before he did... he said the words "oh no". i said what. he said he cant do it cuz 1) i was runnin rich. 2) it would be dangerous to do it because my truck's timing was flickering from 15 to 16 already so... i'm soooo pi$$ed right now. you have no idea. so.... anyone in New Mexico??? (i have an 04 with cai and exhaust)

dawgs77 · 07-12-2007, 04:32 PM

Unless it's out of this world you typically can not hear detonation on a small scale.

What your dealer told you is corect. You run the possibility of causing detonation with the advance and you should run a higher octane fuel. 89 should be good enough to keep the truck from pulling the timing back.

If you ran 87 and you had slight detonation...you wouldn't even know. The truck would automatically yank your timing without you having any clue what's going on...nor would you even notice it.

dawgs77 · 07-12-2007, 04:34 PM

Quote:

Originally Posted by hobbsy

went to my dealer today. he said he would do it for free!!!! ........but then as he was checking the timing before he did... he said the words "oh no". i said what. he said he cant do it cuz 1) i was runnin rich. 2) it would be dangerous to do it because my truck's timing was flickering from 15 to 16 already so... i'm soooo pi$$ed right now. you have no idea. so.... anyone in New Mexico??? (i have an 04 with cai and exhaust)

Boy your dealer backed out of that. Did he tell you what it was running at. The Titan Idles at 14.7ish from the factory. And will cruise at about this A/F ratio also. 14.7 is a lean mixture...lean mixtures and alot of timing can hurt....rich and timing won't hurt a thing...rich is safe!!!! Lean is dangerous!

So...your timing was flickering from 15-16....yup...that's about corect...it needs to be adjusted up to 17 or 18 target idle!!!!

krh2 · 07-12-2007, 04:38 PM

Quote:

Originally Posted by EPXE06

anybody in the San Diego area ??

Please! I've called 4 dealerships here and they wont touch it. Even tried one in OC same thing..

hobbsy · 07-12-2007, 04:39 PM

thanks dawgs; however, i constantly run 89 octane.

hobbsy · 07-12-2007, 05:03 PM

sorry if i confused some people on that last one. i was confused myself. i thought he was talkin to me the first time but guess not. my bad. but thanks a lot dawgs.

spoonman · 07-12-2007, 06:54 PM

Quote:

Originally Posted by krh2

Please! I've called 4 dealerships here and they wont touch it. Even tried one in OC same thing..

im with these guys, who does it in San Diego?

Can we make a sticky of who can give 2 degree timing advances?? - being discussed at Nissan Titan Forums in the Titan Performance Modifications section.