cipher logging help

natedogg799 · 09-29-2007, 12:23 PM

so i am trying to get a specific tune from uprev but i need to know exactly what i need to send them, i logged all of this data while doing some 0-60 runs
A/F CORR-B1 (%)
A/F CORR-B2 (%)
AFR WB-B1 (AFR)
AFR WB-B2 (AFR)
A/F WB-B1 (V)
A/F WB-B2 (V)
ACCEL PED POS 1 (V-Accel)
B-FUEL SCHDL (ms)
CAL/LD VALUE (%)
COOLANT TEMP (F)
ENGINE RPM (rpm)
IGN TIMING (BTDC)
INJ PULSE-B1 (ms)
INJ PULSE-B2 (ms)
INTAKE AIR TMP (F)
MAF GM/S (gm/s)
MAS A/F -B1 (V)
THROTTLE POS 1 (V-Throttle)
VEHICLE SPEED (mph)

what else do i need to send them? how many runs do they need?

QShip · 09-29-2007, 04:29 PM

I would ask Uprev...

**roy365** · 09-29-2007, 04:40 PM

Quote:

Originally Posted by natedogg799

so i am trying to get a specific tune from uprev but i need to know exactly what i need to send them, i logged all of this data while doing some 0-60 runs
A/F CORR-B1 (%)
A/F CORR-B2 (%)
AFR WB-B1 (AFR)
AFR WB-B2 (AFR)
A/F WB-B1 (V)
A/F WB-B2 (V)
ACCEL PED POS 1 (V-Accel)
B-FUEL SCHDL (ms)
CAL/LD VALUE (%)
COOLANT TEMP (F)
ENGINE RPM (rpm)
IGN TIMING (BTDC)
INJ PULSE-B1 (ms)
INJ PULSE-B2 (ms)
INTAKE AIR TMP (F)
MAF GM/S (gm/s)
MAS A/F -B1 (V)
THROTTLE POS 1 (V-Throttle)
VEHICLE SPEED (mph)

what else do i need to send them? how many runs do they need?

looks like you have covered all bases and then some. Just make sure you have your A/F parameter set to wideband. Hurry up and send it before they start charging for the etune!!!!!