Help!.tried the burnout mod and truck now wont go into gear

Dom249 · 12-08-2007, 03:12 PM

Well my friend and I were goin to try out the burnout mod. We cut the wire and hooked up a switch, then it wouldnt work, so we tried connect the red/green wires back again and it still wont go into gear, we also check the fuses and there all good.Now im tuck in the driveway and cant do anything. Any help would be appreciated,

Toomnymods · 12-08-2007, 03:21 PM

if it won't go into gear that means the burn out mod is "ON" and a full throttle burnout is possible.. turn the switch "OFF" and then you can change gears..

Dom249 · 12-08-2007, 03:24 PM

Quote:

Originally Posted by Toomnymods

if it won't go into gear that means the burn out mod is "ON" and a full throttle burnout is possible.. turn the switch "OFF" and then you can change gears..

well the thing is, I dont even have the switch on it, I dont have anything connected to it anymore, and I connected the red/green wires back and it still wont go into gear

Toomnymods · 12-08-2007, 03:31 PM

mustve blown a fuse..

Dom249 · 12-08-2007, 03:43 PM

Quote:

Originally Posted by Toomnymods

mustve blown a fuse..

Checked the all the fuses a 2nd time and no blown fuse.

Toomnymods · 12-08-2007, 05:12 PM

i'd advise getting a test light, somthing is blown somewhere.. trace the wires, some go to the ecu, check the fuses under the hood also..

Dom249 · 12-08-2007, 06:06 PM

Quote:

Originally Posted by Toomnymods

i'd advise getting a test light, somthing is blown somewhere.. trace the wires, some go to the ecu, check the fuses under the hood also..

tried a test lite and no power to it, check all fuses, just started my truck to try again and these codes were thrown
anyonw know exactly what these are?

-------- ECU --------

Found: 2 codes!
**********
U1000
**********
U1001

U1000 CAN* Comm Circuit
U1010 CAN* Comm

^ this is what they are I found but more info on what they are?

Toomnymods · 12-08-2007, 06:08 PM

Quote:

Originally Posted by Dom249

tried a test lite and no power to it, check all fuses, just started my truck to try again and these codes were thrown
anyonw know exactly what these are?

-------- ECU --------

Found: 2 codes!
**********
U1000
**********
U1001

U1000 CAN* Comm Circuit
U1010 CAN* Comm

^ this is what they are I found but more info on what they are?

prob blew up the switch that allows ur truck to shift gears.. i dunno might have better luck finding help on the other titan site.. i dont know much bout the tranny but im sure someone on c l u b t i t a n could help ya