A.R.E. Hard Tonneau PICs

[NITEBLITZ]

Here are some shots that show the A.R.E. hard tonneau installed, exterior shots of my deepwater CC Titan. Installation detail shots to follow.

NITEBLITZ

[IMG]

[dman]

Absolutely beautiful...looks great. How much was it again and did you do install yourself? Thanks for posting the pics.

[NITEBLITZ]

Originally Posted by NITEBLITZ

Here are some shots that show the A.R.E. hard tonneau installed, exterior shots of my deepwater CC Titan. Installation detail shots to follow.

NITEBLITZ

Here are the installation clip details:

[IMG]

[NITEBLITZ]

Originally Posted by dman

Absolutely beautiful...looks great. How much was it again and did you do install yourself? Thanks for posting the pics.

The cost was $795 , that includes installation. Go to their site and see who your local distributor is. They will install and have you back on the road in an hour or less. www.4are.com

Thanks for the comments! I'm pleased with it!


NITEBLITZ

[ckat]

there was no problem with you having the utilitrac? Looks like yiu only lost 2 inches by the gate-what about towards the cab?

[NYTITANMAN]

Nite, that is awesome!! Thanks for the pics. I am sold!!!

[Titanparts1]

Originally Posted by NITEBLITZ

Here are the installation clip details:

[IMG]

That looks great, congrats!!!!

[Doghouse]

WOW that realy looks good!

Dam, I thought I might get away w/o getting one. I now will ahve to save my pennies!

[NITEBLITZ]

Originally Posted by ckat

there was no problem with you having the utilitrac? Looks like yiu only lost 2 inches by the gate-what about towards the cab?

No problems, yes you only lose about 2" at each end!


NITEBLITZ

[NYTITANMAN]

Nite, How easy is it to remove? How much does it weigh?

[FLfinfan]

Probably pretty easy to remove right? Just 4 C clamps. But don't know about the weight. Probably need 2 people because of the size of it, not because of weight.

[NITEBLITZ]

Originally Posted by NYTITANMAN

Nite, How easy is it to remove? How much does it weigh?

Flfinfan is right, just 4 C clamps. Don't know the weight for sure, guess less than 100#. It would take two people due to the width not the weight.

I'll let you know later if this works, I plan to use a hoist and a spreader bar so that I pick it up at the 4 corners. I will then fix it where one person can take the clips off and then just hoist it up into the ceiling of the garage. Then just drive out from under it. Reverse for re-install! This is nothing new, they do it with vehicle hardtops.


NITEBLITZ

[smoketitan]

NICE pics, AND THX, pm'D YA

[TITANATOR]

That Baby looks sweet!! Do they come in different colors to match your Truck color?

[NITEBLITZ]

Originally Posted by TITANATOR

That Baby looks sweet!! Do they come in different colors to match your Truck color?

They take the color code off your truck and then the manufacturer paints it to match your truck's original paint specs. They then ship it to the installer.

NITEBLITZ